Attwood Boat Float Switch 4202-1 | 4 3/8 x 3 7/8 Inch 12V Blue White

Boat part number 1092887 is a new custom float switch from Attwood, part number 4202-1 . Commonly used on Parker Boats, part number 130388 , but can be used on other boats.

This float switch converts any bilge pump that draws 12 amps, 6 amps or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24 degree angle. It incorporates a reliable and affordable mechanical switch that actuates the pump motor at 2" water level. The integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. The wire leads do not flex or hinge with the float, and the sealed switch mechanism resists moisture, fume ignition and electrical shock. Installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation and contains no mercury. Measures approximately 4 3/8" L x 3 7/8" W x 1 3/8" H overall. It has an approximate 33" L wire with (2) raw wire leads, and (2) 1/8" mounting holes.

Sold as a Single.

Specifications:

• Boat Manufacturer: Parker
• Model/Year: Unavailable
• Part Number: 130388
• Part Manufacturer: Attwood
• Part Number: 4202-1
• Materials: Marine Grade Plastic
• Color: Blue / White
• Finish: Glossy
• Electrical: 12V
• Overall Dimensions: 4 3/8" L x 3 7/8" W x 1 3/8" H
• Wire Length: 33" L
• Mounts: (2) 1/8" Mounting Holes
• Connection: (2) Raw Wire Leads