Loading...

Attwood Boat Slip-Ring Penetrating Anchor 9961-1 | 5 1/2 LB Steel

Boat part number 1072643 is a new #7 slip ring penetrating fluke anchor from Attwood, part number 9961-1 .
made for Custom Applications
Sale Price $13.31 Regular Price: $14.95
GLS Stock #: 1072643-PH400
153 in stock
Boat part number 1072643 is a new #7 slip ring penetrating fluke anchor from Attwood, part number 9961-1 .

This 5 1/2 lb. slip-ring fluke anchor is constructed out of hot dip galvanized steel and measures approximately 12 5/8" L x 9 1/4" W x 15 1/8" H overall. These anchors feature a slip-ring shank for easy retrieval of a snagged anchor.

Penetrating fluke anchors dig into mud, sand, or gravel, and stow flat. Pivoting flukes rotate downward into bottom. Excellent weight-to-holding-power ratio, compared to cast anchors. All Attwood penetrating anchors are manufactured of hot dip galvanized steel for corrosion resistance and strength. The assembly is arc-welded steel that maintains consistent fluke-to-shank angles, ensuring quick penetration and a firm hold.

Specifications:
  • Part Manufacturer: Attwood
  • Part Number: 9961-1
  • UPC: 022697996114
  • Material: Steel
  • Overall Dimensions: 12 5/8" L x 9 1/4" W x 15 1/8" H
  • Weight: 5 1/2 lb.

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

Product Questions

what lenth boat is this anchor approved for?
Question by: David Smith on Jun 4, 2020, 4:23 PM
Hi David,
There is not a specific rating for it. I would recommended 15 ft and under when the right amount of line is deployed. No matter the size boat, at the very least 3-1 should be let out. So 10 feet of water, 30 feet of line. If you have any further questions, feel free to contact back.
-
Jake
Answer by: Jake Doro on Jun 5, 2020, 9:04 AM