Bayliner Boat Windshield Support Bracket | 11 1/8 Inch Taupe Aluminum
Boat part number 1077212 is a new windshield support bracket from Bayliner Boats, part number unavailable .
made for Bayliner Boats
$14.95 MSRP: $19.58
GLS Stock #: 1077212-BX063
41 in stock
Boat part number 1077212 is a new windshield support bracket from Bayliner Boats, part number unavailable . May be used on other boats.
This windshield support bracket is constructed out of taupe aluminum, and measures approximately 11 1/8" L x 1 5/8" H x 5/16" Thick overall. Mounts with (2) 1/8" OD mounting holes set apart 1" center to center.
Specifications:
This windshield support bracket is constructed out of taupe aluminum, and measures approximately 11 1/8" L x 1 5/8" H x 5/16" Thick overall. Mounts with (2) 1/8" OD mounting holes set apart 1" center to center.
Specifications:
- Boat Manufacturer: Bayliner Boats
- Part Number: Unavailable
- Material: Aluminum
- Color: Black
- Overall Dimensions: 11 1/8" L x 1 5/8" H x 5/16" Thick
- Mounts: (2) 1/8" OD Mounting Holes Set Apart 1" CTC
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
We need the whole windshield for the Bayliner Sunbridge Cierra 21 foot 1986.
Question by: Barbara Ficke on Sep 13, 2023, 12:25 PM
Hello Barbara,
Unfortunately, we don't currently show one specific to your Ciera and it isn't something we can source/order.
I'm afraid we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://i.ebayimg.com/images/g/6rAAAOSwv0VimObt/s-l500.jpg
The single most important measurement is the 82". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your Ciera and it isn't something we can source/order.
I'm afraid we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://i.ebayimg.com/images/g/6rAAAOSwv0VimObt/s-l500.jpg
The single most important measurement is the 82". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Sep 13, 2023, 1:01 PM