Beede Boat Oil Pressure Gauge 947884 | 2 Inch Black
This clear illuminated oil pressure gauge measures approximately 2 1/4" across the bezel and uses an approximate 2" diameter cutout. It features a black bezel, flat lens, black face with white writing, and a white needle. The Beede logo is featured in small letters across the bottom. On the back there are (4) 3/4" threaded terminals and (4) male spade connections, (3) of the spades are at an angle. The mounting bracket is not included.
- Part Manufacturer: Beede
- Part Number: 947884
- Colors: Black and white
- Lens: Flat
- Bezel: Black
- Overall Dimensions: 2 1/4" diameter across the bezel
- Cutout: 2"
- 0 - 150 PSI
- Mounting Bracket Not Included
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
We are almost certain the one from Faria (now FariaBeede) shown at the link below will work, but we might suggest checking with them to be sure.