Bennington Boat Table Molding | w/ Adhesive 3/4 Inch Napa Beige (10FT)

Boat part number 1079757 is a new, off the roll, 10 FT section of napa beige 1/2" adhesive table edge trim molding from Bennington Boats, part number unavailable.
made for Bennington Boats
$24.95 MSRP: $33.68
GLS Stock #: 1079757-PE138
274 in stock

Bennington Boat Table Molding | w/ Adhesive 3/4 Inch Napa Beige (10FT)

Boat part number 1079757 is a new, off the roll, 10 FT section of napa beige 1/2" adhesive table edge trim molding from Bennington Boats, part number unavailable.

This flexible adhesive table edge trim molding is constructed out of beige plastic and measures approximately 3/4" W x 1/4" H overall. The adhesive strip inside the molding measures approximately 1/2" W.

Sold in 10 foot sections. Simply enter the number of 10' sections needed in the quantity field. Lengths are sold as continuous feet.

Specifications:
  • Boat Manufacturer: Bennington Boats
  • Part Number: Unavailable
  • Materials: Plastic
  • Color: Napa Beige
  • Overall Dimensions: 3/4" W x 1/4" H
  • Mounts: 1/2" W Adhesive Strip
  • Length: 10 FT Sections
This product is cut to length and we cannot accept returns or cancellations on any cut to length product.

Simply peel off and apply to any dry, clean surface. Please allow surface a minimum of 24 hours to dry before applying decals and/or pinstripe.

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate. Hardware and instruction / installation manual not included.

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.