Bennington Boat Table Molding | w/ Adhesive 3/4 x 1/4 Inch (10 FT)
Boat part number 1079718 is a new, off the roll, 10FT section of black 1/2" adhesive table edge trim molding from Bennington Boats, part number unavailable.
made for Bennington Boats
$24.95
MSRP: $33.68
GLS Stock #:
1079718-FD520
167 in stock
Boat part number 1079718 is a new, off the roll, 10FT section of black 1/2" adhesive table edge trim molding from Bennington Boats, part number unavailable.
This adhesive table edge trim molding is constructed out of black plastic and measures approximately 3/4" W x 1/4" H overall. The adhesive strip inside the molding measures approximately 1/2" W.
Sold in 10 foot sections. Simply enter the number of 10' sections needed in the quantity field. Lengths are sold as continuous feet.
Specifications:
This adhesive table edge trim molding is constructed out of black plastic and measures approximately 3/4" W x 1/4" H overall. The adhesive strip inside the molding measures approximately 1/2" W.
Sold in 10 foot sections. Simply enter the number of 10' sections needed in the quantity field. Lengths are sold as continuous feet.
Specifications:
- Boat Manufacturer: Bennington Boats
- Part Number: Unavailable
- Materials: Plastic
- Color: Black
- Overall Dimensions: 3/4" W x 1/4" H
- Mounts: 1/2" W Adhesive Strip
- Length: Sold by the foot
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.