Besenzoni Boat Electric Seat Pedestal S182 | Table Mount
Boat part number 1049383 is a new electric helm seat pedestal from Besenzoni, part number S182 .
made for Cobalt Boats
$1,295.00 MSRP: $2,613.45
GLS Stock #: 1049383-XIN3966FH878
Only 5 left
Boat part number 1049383 is a new electric helm seat pedestal from Besenzoni, part number S182 . Commonly used on Cobalt Boats, but may be used on other boats.
This heavy duty seat pedestal is constructed out of white powder coated aluminum, and measures approximately 21 1/2" H x 17 3/4" D x 9 7/8" W overall. Fore / Aft adjustment of 6" and the height can be adjusted approximately 7 1/2". Mounts approximately 17" below deck.
Electric Seat Support, up/down and fore/aft movement, powder coated. May contain slight scratches / scuffs from storage and handling.
Manufacturer tag reads BES182 P216 2M BESENZONI
Motor Specifications:
This heavy duty seat pedestal is constructed out of white powder coated aluminum, and measures approximately 21 1/2" H x 17 3/4" D x 9 7/8" W overall. Fore / Aft adjustment of 6" and the height can be adjusted approximately 7 1/2". Mounts approximately 17" below deck.
Electric Seat Support, up/down and fore/aft movement, powder coated. May contain slight scratches / scuffs from storage and handling.
Manufacturer tag reads BES182 P216 2M BESENZONI
Motor Specifications:
- Type: MP56M
- 12 VDC, 80 Watt
- RPM: 2800
- Serv: S2 40 min
- Part Manufacturer: Besenzoni
- Part Number: S182
- Material: Aluminum
- Color: White
- Finish: Powder Coated
- Overall Dimensions: 21 1/2" H x 17 3/4" D x 9 7/8" W
- Slide Base: 17 3/4" D x 9 7/8" W
- Fore / Aft Adjustment: 6"
- Vertical Adjustment: 7 1/2"
- Mounts: (4) 5/16" Dia. holes
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.