Boat Switch Set | Dual Engine w/ Ignition (18 Piece)
Boat part number 1082304 is a new 18-piece dual engine switch set, part manufacturer unavailable.
made for Custom Applications
$239.95
MSRP: $323.93
GLS Stock #:
1082304-5F304
Only 1 left
Boat part number 1082304 is a new 18-piece dual engine switch set, part manufacturer unavailable.
This set includes the following:
Each ignition switch measures approximately 1 1/2" Dia. x 3 1/2" D overall and requires an approximate 3/4" Dia. cutout. Each switch has (4) terminals.
Kill Switch
This kill switch is constructed out of black plastic and includes a red lanyard. Measures approximately 2" W x 2 3/4" H overall and has (2) 3/16" Dia. mounting holes. Has (2) 2-pin male connections.
Rocker Switches
Each illuminated rocker switch is constructed out of black marine grade plastic. Each switch measures approximately 1" W x 2" H x 2" D overall and requires a cutout of approximately 7/8" W x 3/4" H.
Specifications:
This set includes the following:
- (2) Ignition Switches w/ (2) Keys | ACC/OFF/RUN/START
- (1) Kill Switch w/ Lanyard
- (1) 12V Receptacle | 1 1/8" Dia. Cutout | 2-spade
- (2) Accessory | ON/OFF | 4-spade
- (1) Engine Room Lights | ON/OFF | 4-spade
- (1) Windlass Power | ON/OFF | 4-spade
- (1) Forward Bilge | ON/OFF | 4-spade
- (1) Wiper | ON/OFF | 4-spade
- (1) Engine Hatch | Momentary ON/OFF/Momentary ON | 8-spade
- (1) Battery Parallel | Momentary ON/OFF | 6-spade
- (1) Aft Bilge | ON/OFF | 4-spade
- (1) Overhead Lights | ON/OFF | 4-spade
- (1) Courtesy Lights | ON/OFF | 4-spade
- (1) Blower | ON/OFF | 4-spade
- (1) Navigation / Anchor Lights | ON/OFF/ON | 8-spade
- (1) Horn | Momentary ON/OFF | 4-spade
Each ignition switch measures approximately 1 1/2" Dia. x 3 1/2" D overall and requires an approximate 3/4" Dia. cutout. Each switch has (4) terminals.
Kill Switch
This kill switch is constructed out of black plastic and includes a red lanyard. Measures approximately 2" W x 2 3/4" H overall and has (2) 3/16" Dia. mounting holes. Has (2) 2-pin male connections.
Rocker Switches
Each illuminated rocker switch is constructed out of black marine grade plastic. Each switch measures approximately 1" W x 2" H x 2" D overall and requires a cutout of approximately 7/8" W x 3/4" H.
Specifications:
- Part Manufacturer: Unavailable
- Part Number: Unavailable
- Material: Plastic
- Color: Black
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.