Carver Boat Water Holding Tank 6103840 | Polyethylene 80 Gallon
Boat part number 8700855 is a new polyethylene water holding tank from Carver Yachts, part number 6103840 .
made for Carver Yachts
$289.95 MSRP: $539.99
GLS Stock #: 8700855-KV758
Only 1 left
Boat part number 8700855 is a new polyethylene water holding tank from Carver Yachts, part number 6103840 . May be used on other boats.
This water holding tank is constructed from polyethylene, and has an 80 gallon capacity, per manufacturer. Measures approximately 24 1/8" W x 30" H x 27 1/8" D overall. Connects with (1) 3 1/4" ID and (2) 1 3/4" ID threaded fitting openings and (1) 3/4" ID threaded opening.
Note: Contains some minor scuffs, scratches and dirt due to storage and handling. See photos for example. Also note, the 3 1/4" diameter opening will need to be opened before use.
Specifications:
This water holding tank is constructed from polyethylene, and has an 80 gallon capacity, per manufacturer. Measures approximately 24 1/8" W x 30" H x 27 1/8" D overall. Connects with (1) 3 1/4" ID and (2) 1 3/4" ID threaded fitting openings and (1) 3/4" ID threaded opening.
Note: Contains some minor scuffs, scratches and dirt due to storage and handling. See photos for example. Also note, the 3 1/4" diameter opening will need to be opened before use.
Specifications:
- Boat Manufacturer: Carver Yachts
- Part Number: 6103840
- Material: Polyethylene
- Capacity: approx. 80 Gallons
- Openings: (1) 3 1/4" ID threaded un-drilled, (2) 1 3/4" ID threaded, (1) 3/4" ID threaded
- Manufacturer Size: 30 x 24 x 27
- Overall Dimensions: 24 1/8" W x 30" H x 27 1/8" D
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.