Chaparral Boat Glass Windshield 51.0001 | 244 Sunesta 63 Inch (4 PC)
Boat part number 7201892 is a new 4 piece glass windshield for a 2014 Chaparral 244 Sunesta Boat, part number 51.0001 .
made for Chaparral Boats
$2,995.00 MSRP: $4,320.00
GLS Stock #: 7201892-4N122
22 in stock
Boat part number 7201892 is a new 4 piece glass windshield for a 2014 Chaparral 244 Sunesta Boat, part number 51.0001 . Manufactured by Taylor Made.
This windshield is constructed out of an aluminum frame, with clear tempered safety glass. Measures approximately 63" wide across the back from tip to tip, and 58 1/2" wide from the inside curve to the inside curve. It measures approximately 76 1/2" deep from the front of the windshield to the back and stands approximately 15 1/2" tall overall. The two front center sections of the windshield have different measurements; port side measures 29" W x 25 1/2" H and starboard measures 30 1/2" W x 25 1/2" H. The side wings each measure approximately 76 1/2" L overall. See photos for measurements.
Tags on windshields read as follows:
Specifications:
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
This windshield is constructed out of an aluminum frame, with clear tempered safety glass. Measures approximately 63" wide across the back from tip to tip, and 58 1/2" wide from the inside curve to the inside curve. It measures approximately 76 1/2" deep from the front of the windshield to the back and stands approximately 15 1/2" tall overall. The two front center sections of the windshield have different measurements; port side measures 29" W x 25 1/2" H and starboard measures 30 1/2" W x 25 1/2" H. The side wings each measure approximately 76 1/2" L overall. See photos for measurements.
Tags on windshields read as follows:
- (1) 51.0001 CHA 217237257 SUN 07 SL PORT FRONT
- (1) 51.00013 CHA 217237257 SUN 07 SL STARBOARD FRONT
- (1) 51.00016 CHA 217237257 SUN 07 SL STARBOARD WING
- (1) 51.00015 CHA 217237257 SUN 07 SL PORT WING
Specifications:
- Boat Manufacturer: Chaparral
- Model: 244 Sunesta
- Year: 2014
- Part Numbers: 51.0001
- Part Manufacturer: Taylor Made
- Part Number: 217237257
- Material: Tempered Safety Glass
- Tint: Clear
- Starboard Side Center Walkthrough: 30 1/2" W x 25 1/2" H
- Port Side Center Walkthrough: 29" W x 25 1/2" H
- Overall Dimensions: 63" W x 76 1/2" D x 15 1/2" H
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Please note, actual measurements may vary. To help with proper fitting, we strongly recommend purchasing a template before placing your order. To purchase the $25.00 template, please contact customer service at (262) 898-1855. The price of the template will be deducted from the windshield cost if you purchase that windshield.
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
Product Questions
Wondering if this will work for a 2008 224 sunesta. Trying to replace the low profile windshield that doesn't have a center piece. Is this standard height and just need to also add a walkthrough center piece? Do you have that as well? Could you check on that and let me know if you have templates I could get for both?
Question by: Tom Yaroch on Apr 26, 2022, 4:18 PM
Hi Tom,
Unfortunately, we don't have any way to cross reference the glass windshields we have (including this one) to specific boats. We aren't dealers and don't know what was used on your 224 (or other boats) We believe this one wasn't designed to have a center walk through, since those pieces fit together... though you could try checking with a dealer.
You might want to start by looking at the dimensional photo. That 58 1/2" measurement is the critical one. If you can make that work, the rest often falls in to place.
Gene
Unfortunately, we don't have any way to cross reference the glass windshields we have (including this one) to specific boats. We aren't dealers and don't know what was used on your 224 (or other boats) We believe this one wasn't designed to have a center walk through, since those pieces fit together... though you could try checking with a dealer.
You might want to start by looking at the dimensional photo. That 58 1/2" measurement is the critical one. If you can make that work, the rest often falls in to place.
Gene
Answer by: Admin on Apr 27, 2022, 11:00 AM
Hello, My name is Tom Barrett. We have a Chapparal 230 Suncoast that we bought new in September of 2018. On Sunday, while boating we noticed a crack in the bottom of the drivers side windshield about one and a half inches long. Later, while washing down the boat, we noticed that the crack had grown to about 6 inches. The following day, the crack extended across the windshield and the windshield shattered into little pieces. What happened, and is a replacement windshield available.
My email address is red07ulra@yahoo.com Thanks very much
My email address is red07ulra@yahoo.com Thanks very much
Question by: Tom Barrett on Apr 26, 2021, 7:42 PM
Hello Tom,
Honestly not sure why a windshield would shatter like that.
Unfortunately we don't currently have one specific to your 230 and it isn't something we can source/order.
If a dealer can't supply replacments, you may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/7c4bf11e5b00fdb8413327136c54afc9/b/b/bbe98248d81e362715211a34fb669c7a_1.jpg
The single most important measurement is the 74". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 which is refunded if the windshield is purchased.
Hope this helps!
Gene
Honestly not sure why a windshield would shatter like that.
Unfortunately we don't currently have one specific to your 230 and it isn't something we can source/order.
If a dealer can't supply replacments, you may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/7c4bf11e5b00fdb8413327136c54afc9/b/b/bbe98248d81e362715211a34fb669c7a_1.jpg
The single most important measurement is the 74". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Gene Warmuth on Apr 27, 2021, 1:16 PM