Faria Boat Multifunction Tachometer Gauge GTC075A | 3 1/4 Inch Marine
Boat part number 7910030 is a new tachometer with volt meter gauge from Faria, part number GTC075A .
made for Custom Applications
$79.95 MSRP: $114.68
GLS Stock #: 7910030-AX548
Only 2 left
Boat part number 7910030 is a new tachometer with volt meter gauge from Faria, part number GTC075A .
This 7000 RPM clear LED illuminated gauge features a domed lens, silver bezel, gray face with black graphics, and a blue needles. Measures approximately 3 3/4" Dia. across the face including bezel x 4 1/4" D overall, and requires a 3 1/4" Dia. cutout. Hosts 8-pin Metri Pack connection.
Specifications:
This 7000 RPM clear LED illuminated gauge features a domed lens, silver bezel, gray face with black graphics, and a blue needles. Measures approximately 3 3/4" Dia. across the face including bezel x 4 1/4" D overall, and requires a 3 1/4" Dia. cutout. Hosts 8-pin Metri Pack connection.
Specifications:
- Boat Manufacturer: Unavailable
- Part Manufacturer: Faria
- Part Number: GTC075A
- Color: Silver / Gray
- Overall Dimensions: 3 3/4" Dia. x 4 1/4" D
- Cutout: 3 1/4" Dia.
- Mount: Threaded posts
- Connection: 8-Pin Metri Pack
- Set up for: 4/6/8 Cylinders | 4/6/8/10/12 Pole
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
Product Questions
Will this tach work with a 200hp SHO Yamaha outboard motor and if so how would I setup the switch?
Thank you..
Thank you..
Question by: Jack Ramos on Jul 25, 2023, 6:34 AM
Hello Jack,
Yes, the tach will work for you. You'd need to set the switch on back to "5" for 12 pole. You will however, need to contact FariaBeede to get the correct sequence for the pin hookup. These came to us without wiring diagrams. Sorry.
Gene
Yes, the tach will work for you. You'd need to set the switch on back to "5" for 12 pole. You will however, need to contact FariaBeede to get the correct sequence for the pin hookup. These came to us without wiring diagrams. Sorry.
Gene
Answer by: Admin on Jul 25, 2023, 12:27 PM
will this work on a 1988 70 hp evinrude motor
Question by: Michael d Mackintosh on Jun 1, 2022, 5:04 PM
Hello Michael,
Yes, it sure will. You'd want to set the switch on back to "5" for 12 pole. Note too - this gauge connects with an 8 pin metri pack connector (which we do not currently have)
Gene
Yes, it sure will. You'd want to set the switch on back to "5" for 12 pole. Note too - this gauge connects with an 8 pin metri pack connector (which we do not currently have)
Gene
Answer by: Admin on Jun 2, 2022, 10:35 AM