Faria Boat Tachometer Gauge TDH232A | 3 1/4 Inch Signature Gold Diesel
Boat part number 8203481 is a new Signature Gold series diesel tachometer gauge with digital hour meter from Faria, part number TDH232A .
made for Four Winns Boats
$129.95 MSRP: $175.43
GLS Stock #: 8203481-FB943
35 in stock
Boat part number 8203481 is a new Signature Gold series diesel tachometer gauge with digital hour meter from Faria, part number TDH232A . Commonly used on the Four Winns Boats, part number 024-0539.
This clear illuminated diesel tachometer gauge features a domed lens, gold bezel, gray face with black, white, and gold graphics, and a white needle. Measures approximately 3 3/4" Dia. across the face x 3 1/2" D overall, and requires a 3 1/4" dia. cutout. Connects with (1) male spade, and (2) threaded posts.
Specifications:
This clear illuminated diesel tachometer gauge features a domed lens, gold bezel, gray face with black, white, and gold graphics, and a white needle. Measures approximately 3 3/4" Dia. across the face x 3 1/2" D overall, and requires a 3 1/4" dia. cutout. Connects with (1) male spade, and (2) threaded posts.
Specifications:
- Boat Manufacturer: Four Winns Boats
- Part Number: 024-0539
- Part Manufacturer: Faria
- Part Number: TDH232A
- Fuel: Diesel
- Color: Gold / Gray
- Overall Dimensions: 3 3/4" Dia. x 3 1/2" D
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
Product Questions
I have a 2004 210 Horizon. This tach gauge matches appearance wise, but my boat is not a diesel. Is it compatible?
Question by: Jennifer A Shenberger on Jul 4, 2021, 5:34 PM
Hello Jennifer,
No, I'm afraid not at all. I presume you are running an I/O, and if so, we unfortunately don't have the same tach for you. Typically you'd run a 6000 RPM tach, but many 7000 RPM tachs (like the one at the link below) will work for you:
Link: https://www.greatlakesskipper.com/teleflex-boat-tachometer-gauge-62130-driftwood-gold-3-1-4-inch
Unfortuantely that's the closest thing we have right now.
Gene
No, I'm afraid not at all. I presume you are running an I/O, and if so, we unfortunately don't have the same tach for you. Typically you'd run a 6000 RPM tach, but many 7000 RPM tachs (like the one at the link below) will work for you:
Link: https://www.greatlakesskipper.com/teleflex-boat-tachometer-gauge-62130-driftwood-gold-3-1-4-inch
Unfortuantely that's the closest thing we have right now.
Gene
Answer by: Gene Warmuth on Jul 5, 2021, 8:44 AM