Florida Boat Fuel Gas Tank FMT-73-LRS | 73 Gallon 46 1/2 Inch Aluminum
Boat part number 1093720 is a new fuel / gas tank from Florida Marine Tanks, part number FMT-73-LRS .
made for Custom Applications
$730.95 MSRP: $986.78
GLS Stock #: 1093720-KV830
Only 1 left
Boat part number 1093720 is a new fuel / gas tank from Florida Marine Tanks, part number FMT-73-LRS .
This fuel tank is constructed out of gray aluminum and has a capacity of approximately 73 gallons per manufacturer. It measures approximately 46 1/2" L x 31" W x 14 3/4" H overall, with a height of 17" H including fittings. Features (1) pre-installed sending unit with a standard range of 35 - 240 ohms.
Has the following connections:
Specifications:
This fuel tank is constructed out of gray aluminum and has a capacity of approximately 73 gallons per manufacturer. It measures approximately 46 1/2" L x 31" W x 14 3/4" H overall, with a height of 17" H including fittings. Features (1) pre-installed sending unit with a standard range of 35 - 240 ohms.
Has the following connections:
- (1) 1 1/2" Dia. fuel inlet
- (1) 3/8" Dia. barbed fuel outlet
- (1) 5/8" Dia. barbed vent
- (1) 2-pin male Deutsch
Specifications:
- Part Manufacturer: Florida Marine Tanks
- Part Number: FMT-73-LRS
- Material: Aluminum
- Color: Gray
- Finish: Matte
- Capacity: 73 gallons
- Wall Thickness: 0.125"
- Fuel Type: Gasoline / Diesel
- Overall Dimensions: 46 1/2" L x 31" W x 14 3/4" H (17" H w/ fittings)
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
i have a 115 gal. aluminum gas tank from a 1996 cobia 21wa. i want to order a smaller one maybe 75 gal and create the gap from the smaller size in the back of the boat and just build a wood sub frame to keep it from shifting rearward. the idea is to eliminate the weight in back of the boat. with the newer motors mpg. improvement i dont see me ever needing 115 gallons anyways. i was wondering if i brang the tank in to your shop can you cut it and reweld shorter ?
Question by: steven kraydich on Oct 3, 2023, 6:46 AM
Hello Steven,
I'm afraid we don't make these, and don't do any sort of fabricating - we purchase overstocks & closeouts - and are just a warehouse.
You could try checking with a area metal fabricator, but honestly, good luck finding one that would cut/weld a ued fuel tank.
Sorry we couldn't help.
Gene
I'm afraid we don't make these, and don't do any sort of fabricating - we purchase overstocks & closeouts - and are just a warehouse.
You could try checking with a area metal fabricator, but honestly, good luck finding one that would cut/weld a ued fuel tank.
Sorry we couldn't help.
Gene
Answer by: Admin on Oct 3, 2023, 8:27 AM
Does this tank have two fuel pick-ups for dual engines?
Question by: Joseph Gerace on Jul 19, 2022, 3:20 PM
Hello Joseph,
Sorry no, it only has what is shown. Just the one pick up.
Gene
Sorry no, it only has what is shown. Just the one pick up.
Gene
Answer by: Admin on Jul 20, 2022, 10:37 AM
How many internal baffles does the tank have?
Question by: Scott D Thistlethwaite on Jun 1, 2022, 1:15 PM
Hi Scott,
I don't believe this one has any baffles. I went and looked and didn't see any weld lines on the outside that would indicate such. However, you might want to contact Florida Marine Tanks to be sure.
Gene
I don't believe this one has any baffles. I went and looked and didn't see any weld lines on the outside that would indicate such. However, you might want to contact Florida Marine Tanks to be sure.
Gene
Answer by: Admin on Jun 2, 2022, 11:47 AM
Will this tank fit a 2000 sea swirl Striper 2100 walk around ?? Thanks in advance
Question by: Eddie r on Jan 12, 2022, 7:45 PM
Hi Eddie,
I'm sorry, but we do not know. We are not dealers, and cannot cross reference them to specific boats. You'd pretty much need to just go by the measurements in the ad.
Gene
I'm sorry, but we do not know. We are not dealers, and cannot cross reference them to specific boats. You'd pretty much need to just go by the measurements in the ad.
Gene
Answer by: Gene Warmuth on Jan 13, 2022, 8:04 AM
Do you have measurements for the location of the connections on the FMT-73-LRS fuel tank? Particularly the distance from the front of the tank. Thanks
Question by: Robert Glancy on Nov 21, 2021, 8:49 AM
Hi Robert,
This is stored at a fulfilment location, but I'll see what we can do. It may take a day - is that ok?
Gene
This is stored at a fulfilment location, but I'll see what we can do. It may take a day - is that ok?
Gene
Answer by: Gene Warmuth on Nov 22, 2021, 9:08 AM