Florida Marine Boat Fuel Gas Tank FMT-210-CV | 210 Gallon Aluminum
Boat part number 1095415 is a new 210 gallon fuel / gas tank from Florida Marine Tanks, part number FMT-210-CV .
made for Carver Yachts
$1,890.00 MSRP: $2,551.50
GLS Stock #: 1095415-KV774
Only 1 left
Boat part number 1095415 is a new 210 gallon fuel / gas tank from Florida Marine Tanks, part number FMT-210-CV . Commonly used on Carver Yachts, part number unavailable.
This fuel tank is constructed out of aluminum and has a capacity of approximately 210 gallons per manufacturer. It measures approximately 92" L x 18" W x 33 5/8" H (w/ fittings) overall. Features (1) pre-installed sending unit with a standard range of 35 - 240 ohms.
Has the following connections:
Specifications:
This fuel tank is constructed out of aluminum and has a capacity of approximately 210 gallons per manufacturer. It measures approximately 92" L x 18" W x 33 5/8" H (w/ fittings) overall. Features (1) pre-installed sending unit with a standard range of 35 - 240 ohms.
Has the following connections:
- (2) wire leads
- (2) 5/8" Dia. barbed
- (1) 2" Dia. barbed
Specifications:
- Boat Manufacturer: Carver Yachts
- Part Number: Unavailable
- Part Manufacturer: Florida Marine Tanks
- Part Number: FMT-210-CV
- Material: Aluminum
- Color: Silver
- Capacity: 210 gallons
- Max Test Pressure: 4 PSI / 27 kPa
- Wall Thickness: 0.19"
- Fuel Type: Gasoline or Diesel
- Overall Dimensions: 92" L x 18" W x 33 5/8" H (w/ fittings)
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
Product Questions
Is this the gas fuel tank that would been installed in a 1987 Carved 4207. Because of the location on the boat we can only get close measurements, but this appears to be the unit. My measurements as best we can determine are very close to this tanks. Thanks for your help.
Question by: David Jones on Mar 26, 2022, 8:00 AM
Hello David,
I'm sorry, but we do not know. We aren't Carver dealers, and don't know what was installed on your 4207. Going back to '87, a dealer may not be able to tell you either. If that is the case, we suggest finding an online Carver owners forum and post the question there. Another owner may be your best resource.
Gene
I'm sorry, but we do not know. We aren't Carver dealers, and don't know what was installed on your 4207. Going back to '87, a dealer may not be able to tell you either. If that is the case, we suggest finding an online Carver owners forum and post the question there. Another owner may be your best resource.
Gene
Answer by: Admin on Mar 27, 2022, 10:29 AM