Four Winns Boat Windshield 060-2704 | Taylor Made 75 Inch 5761040181
Boat part number 8201045 is a 3 Piece Aluminum Boat Windshield manufactured by Taylor Made Marine for Four Winns Boats.
made for Four Winns Boats
$1,695.00 MSRP: $3,365.00
GLS Stock #: 8201045-4N076
Only 1 left
Boat part number 8201045 is a new 3 Piece Aluminum Boat Windshield manufactured by Taylor Made Marine for Four Winns Boats. Taylor number GLS259 Four Winns number 0602705 .
There is also a sticker on the glass that reads:
060-2705
5761040182
GLS 259 GS 12 FRTS PR
Note: The tip of the starboard side wing is slightly bent - it won't affect installation. There are also some scuffs from handling.
Specifications:
Because of the size and/or commodity of this item, we must ship via truck line. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
There is also a sticker on the glass that reads:
060-2705
5761040182
GLS 259 GS 12 FRTS PR
Note: The tip of the starboard side wing is slightly bent - it won't affect installation. There are also some scuffs from handling.
Specifications:
- Manufacturer: Taylor Made
- Part Number: GLS259
- Boat Maker: Four Winns
- Part Number: 060-2705
- Materials: Matte (frame) / Tinted Tempered glass
- Hardware: Included
- Back tip to tip: 88"
- Depth: 113"
- Front Width: 75"
- Height: 15"
- Walk Through: 17 1/2"
Because of the size and/or commodity of this item, we must ship via truck line. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Because of the size and/or commodity of this item, we must ship via truckline. The shown freight cost is for the LOWER 48 STATES ONLY and shipped to a business at a commercial address WITH LOADING DOCK. We can ship to your residence, or possibly a nearby terminal. We can also offer international shipping. Please call or email for a shipping quote if needed.
Product Questions
I have a 2006 four winds horizon 26 feet long. Is this the windshield for me
Question by: John Boucher on Nov 13, 2023, 8:55 PM
Hello John,
I'm afraid we aren't able to cross reference the windshield to specific boats. You'd need to either contact a dealer and give them that 060-2704 part number, or just go by the measurements in the ad.
Sorry we could not help.
Gene
I'm afraid we aren't able to cross reference the windshield to specific boats. You'd need to either contact a dealer and give them that 060-2704 part number, or just go by the measurements in the ad.
Sorry we could not help.
Gene
Answer by: Admin on Nov 14, 2023, 8:03 AM
considering item at <https://www.greatlakesskipper.com/four-winns-060-2704-taylor-made-75-inch-tempered-glass-aluminum-frame-boat-windshield> How may I determine fitment for this item for my application 1991 Four Winns 200 Horizon? I will check measurements today as a starting point. Any other suggestions or replies are welcomed !
Question by: chuck gammon on Jun 4, 2023, 7:24 AM
Hi Chuck,
You could try contacting a dealer and give them that 060-2704 Four Winns number - the MIGHT be able to tell you. Other than that, it's pretty much just going by the meausurements in the ad. That isn't as daunting as it sounds.
If you look at the dimensional photo, you'll see that 75" dimension. That is center to center of each radius. If you can make that work, the rest will often fall into place.
Note too: We can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
You could try contacting a dealer and give them that 060-2704 Four Winns number - the MIGHT be able to tell you. Other than that, it's pretty much just going by the meausurements in the ad. That isn't as daunting as it sounds.
If you look at the dimensional photo, you'll see that 75" dimension. That is center to center of each radius. If you can make that work, the rest will often fall into place.
Note too: We can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on Jun 4, 2023, 12:56 PM
Would this fit the 2010 h180ss four winns?
Question by: Trina Goguen on Jul 18, 2022, 8:00 AM
Hello Trina,
I'm sorry, but we are not able to cross reference the windshields we have to specific boats. You'd pretty much need to measure where you'd be mounting it, to see if the dimensions work.
Gene
I'm sorry, but we are not able to cross reference the windshields we have to specific boats. You'd pretty much need to measure where you'd be mounting it, to see if the dimensions work.
Gene
Answer by: Admin on Jul 18, 2022, 11:17 AM
Can you send a close up shot of the rubber gasket that goes around the entire windshield?
Question by: Glenn Kiladis on May 20, 2022, 7:17 AM
Hello Glenn,
Unfortunately, these are stored at a fulfilment location and we cannot get additional photos. If you contact a dealer, they might have something on file. Sorry.
Gene
Unfortunately, these are stored at a fulfilment location and we cannot get additional photos. If you contact a dealer, they might have something on file. Sorry.
Gene
Answer by: Admin on May 22, 2022, 11:13 AM
Will this windshield fit a 2003 Horizon 200? If not do you have one that will?
Question by: Joe on May 6, 2022, 10:25 AM
Hi Joe,
Unfortunately, we don't currently show one specific to your 200 and it isn't something we can source/order or cross reference to what we do have.
Going back to '03, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Unfortunately, we don't currently show one specific to your 200 and it isn't something we can source/order or cross reference to what we do have.
Going back to '03, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg
The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Admin on May 6, 2022, 10:49 AM