Four Winns Boat Deck Hinge 031-2042 | 13 Gauge Stainless Steel
Boat part number 8201378 is a new stainless steel forward deck hinge from Four Winns Boat, part number 031-2042 .
made for Four Winns Boats
$12.95 MSRP: $17.48
GLS Stock #: 8201378-AZ045
Only 10 left
Boat part number 8201378 is a new stainless steel forward deck hinge from Four Winns Boat, part number 031-2042 . Manufacturer unavailable, part number SSHN66031 . May be used on other boats.
This hinge is constructed from 13 gauge stainless steel with a polished finish. This "single" hinge measures approximately 6" L x 2 1/8" W (fully open) and 3 1/8" L x 3" W (closed) overall. There are (6) 1/4" diameter total mounting holes.
Note: Sold as a single. See photos for additional measurements.
Specifications:
This hinge is constructed from 13 gauge stainless steel with a polished finish. This "single" hinge measures approximately 6" L x 2 1/8" W (fully open) and 3 1/8" L x 3" W (closed) overall. There are (6) 1/4" diameter total mounting holes.
Note: Sold as a single. See photos for additional measurements.
Specifications:
- Boat Manufacturer: Four Winns
- Model: Unavailable
- Year: Unavailable
- Part Number: 031-2042
- Part Manufacturer: Unavailable
- Part Number: SSHN66031
- Material: Stainless Steel
- Color: Silver
- Finish: Polished
- Overall Dimensions: 6" L x 2 1/8" W (fully open)
- Mounts: (6) Total 1/4" Dia. mounting holes
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Re: FOUR WINNS BOAT FORWARD DECK HINGE 031-2042 | 6 X 2 1/8 INCH 13 GAUGE STAINLESS
Is the rotation 180 or 270 (or other) degrees?
What is the height of hinge knuckle off the mounting surface?
Is the rotation 180 or 270 (or other) degrees?
What is the height of hinge knuckle off the mounting surface?
Question by: Bob Saccomanno on Jan 18, 2022, 10:38 AM
Hello Bob,
This hinge will be 3/8" in the center.
Thank you!
Ethan
This hinge will be 3/8" in the center.
Thank you!
Ethan
Answer by: Ethan Doro on Jan 18, 2022, 1:39 PM