Loading...

G3 Boat Steering Console Panel 73427404 | w/ Faria Gauges Silver STBD

Boat part number 7501300 is a new starboard steering console dash panel for G3 Boats, part number 73427404 .
made for G3 Boats
$549.95 MSRP: $742.43
GLS Stock #: 7501300-GB418
Only 1 left
Boat part number 7501300 is a new starboard steering console dash panel for G3 Boats, part number 73427404 .

This steering dash panel is constructed from metallic silver plastic with black faux woodgrain inserts. It measures approximately 31 1/4" W x 13" H x 27 1/4" D overall.

This panel has (3) pre-installed Spun Silver gauges from Faria. Each clear halogen illuminated gauge has a domed lens, silver bezel, silver face, black needle, and black graphics.

This panel features the following gauges:
  • Speedometer | Pitot Connection
  • Fuel Level
  • Tachometer | Gasoline | 4/6/8 cylinder inboard, 4/6/8/10/12 pole outboard
This panel also includes the following:
  • Over Heat Red Indicator Light
  • Low Oil Red Indicator Light
  • 3 1/4" Dia. Steering Cutout
  • Bilge Toggle Switch | ON/OFF
  • Auto/Manual Aerator Toggle Switch | ON/OFF/ON
  • Interior Lights Toggle Switch | ON/OFF
  • Navigation/Anchor Lights Toggle Switch | ON/OFF/ON
  • Master Power Toggle Switch | ON/OFF
  • 12V Receptacle
There are the following connections:
  • (1) 13-spade female
  • (1) 11-pin female
  • (1) 13-spade male
  • (1) dual male/female pin
  • (6) female spade
  • (3) female bullet
  • (2) male bullet
This console panel includes a pre-wired circuit breaker panel that measures approximately 3 1/2" W x 7" H overall.

Features the following breakers:
  • Lights
  • Bilge
  • Horn
  • Courtesy Lights
  • Aerator (Fuse)
  • 12V Outlet
  • Depth Finder
  • Accessory
  • Stereo
Note: Contains minor scratches on a corner. See photos.

Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.

Specifications:
  • Boat Manufacturer: G3
  • Part Number: 73427404
  • Part Manufacturer: Marine Electrical Products (MEP)
  • Material: Plastic
  • Color: Metallic Silver / Black Faux Woodgrain
  • Finish: Glossy
  • Overall Dimensions: 31 1/4" W x 13" H x 27 1/4" D
  • Fuel: Gasoline
  • Set Up For: 4/6/8 cylinder inboard, 4/6/8/10/12 pole outboard

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.

Product Questions

No questions yet. Be the first to ask the question!