Glastron Boat Gauge Panel 025-4741 | GT 185 Mercury Woodgrain
Boat part number 8203364 is a new gauge panel for a GT 185 model Glastron boat, part number 025-4741 .
made for Glastron Boats
$459.95 MSRP: $620.95
GLS Stock #: 8203364-AM256
Only 3 left
Boat part number 8203364 is a new gauge panel for a GT 185 model Glastron boat, part number 025-4741 . Year unavailable.
This gauge panel is constructed out of 1/8" thick marine grade plastic with a woodgrain pattern. Measures approximately 16 5/8" L x 7 1/4" H x 3 1/2" D overall. The installed wiring harness hosts, (1) 15-pin female, (1) 9-pin female, (1) 6-pin female, (1) 3-pin female, (1) 2-pin male, (1) 8-pin, (1) 2-pin Metri and (1) spade female connections. Features and approximate 2" Dia. cutout in the face.
This dash panel features (7) pre-installed Faria gauges from the Euro White series. Each of these clear halogen illuminated gauges feature a silver bezel, flat lens, white face, black lettering, numerals and accents, with black needles.
This panel features the following gauges:
This gauge panel is constructed out of 1/8" thick marine grade plastic with a woodgrain pattern. Measures approximately 16 5/8" L x 7 1/4" H x 3 1/2" D overall. The installed wiring harness hosts, (1) 15-pin female, (1) 9-pin female, (1) 6-pin female, (1) 3-pin female, (1) 2-pin male, (1) 8-pin, (1) 2-pin Metri and (1) spade female connections. Features and approximate 2" Dia. cutout in the face.
This dash panel features (7) pre-installed Faria gauges from the Euro White series. Each of these clear halogen illuminated gauges feature a silver bezel, flat lens, white face, black lettering, numerals and accents, with black needles.
This panel features the following gauges:
- (1) 65 MPH Speedometer | SE9983B | Pitot and (2) spade connections
- (1) 7000 RPM Tachometer | TC9161B | Set up for 4/6/8/10/12 Cylinder and 4/6/8/10/12 Pole Engines | (4) threaded bolt connections and (1) spade connections
- (1) Trim Gauge | GP4499A | Set up for Mercury engines | (3) threaded bolt and (1) spade connection
- (1) Oil Gauge | GP2475A | (3) threaded bolt and (1) spade male
- (1) Volt Gauge | VP4065A | (2) threaded bolt and (1) spade male
- (1) Fuel Gauge | GP2080A | (3) threaded bolt and (1) spade male
- (1) Temp Gauge | GP4075A | (3) threaded bolt and (1) spade male
- (3) Push Button Breakers
- (1) Push Button "Horn"
- (1) Rocker: On/Off " Bigle"
- (1) Rocker: On/Off/On "Nav Anc"
- Boat Manufacturer: Glastron Boats
- Models: GT 185
- Year: Unavailable
- Part Number: 025-4741
- Material: Marine Plastic
- Color: Woodgrain
- Overall Dimensions: 16 5/8" L x 7 1/4" H x 3 1/2" D
- Connections: (1) 15-Pin Female | (1) 9-Pin Female | (1) 6-Pin Female | (1) 3-Pin Female | (1) 2-Pin Male | (1) 8-Pin Male | (1) 2-Pin Metri | (1) Spade Female
- Set up for 4/6/8/10/12 Cylinder and 4/6/8/10/12 Pole Engines
- Set up for Mercury Engines
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
What’s the missing gauge in the center?
Question by: Vander Molen Randi on Jul 3, 2022, 8:36 AM
Hello!
We are thinking it was most likely a depth finder (something like the one at the link below), but aren't certain. We aren't Glaston dealers, so we can't say for sure.
Link: https://www.greatlakesskipper.com/faria-boat-depth-finder-gauge-ds0174a-digital-2-inch-silver
Gene
We are thinking it was most likely a depth finder (something like the one at the link below), but aren't certain. We aren't Glaston dealers, so we can't say for sure.
Link: https://www.greatlakesskipper.com/faria-boat-depth-finder-gauge-ds0174a-digital-2-inch-silver
Gene
Answer by: Admin on Jul 3, 2022, 10:50 AM
Will this Gage set up work on a 1981Glastron SX-190 ?
Question by: Jim Douglas jr on Jul 19, 2021, 11:00 PM
Hello Jim,
This may cross over! We would recommend confirming measurements to be sure this panel will fit in your dash.
Ethan
This may cross over! We would recommend confirming measurements to be sure this panel will fit in your dash.
Ethan
Answer by: Ethan Doro on Jul 20, 2021, 12:11 PM