Godfrey Boat Raised Brand Decal 277430 | Parti Kraft 24 x 6 1/4 Inch - All Questions
Godfrey Boat Raised Brand Decal 277430 | Parti Kraft 24 x 6 1/4 Inch
SKU
1064383
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
We have a 2005 22’. 90 hp
I am needling 2sets door open/close
Also need 2 original boat decals one for each side. Also left front aluminum corner finally need left rear corner with round tow piece
My number to get payment is
618-889-0517
Thank you for your kindness it’s my wife’s pontoon and I’m trying to have it done by Christmas so she can use it next summer I forgot I need remnant 6”x6” to repair a small slice in the vinyl.
I am needling 2sets door open/close
Also need 2 original boat decals one for each side. Also left front aluminum corner finally need left rear corner with round tow piece
My number to get payment is
618-889-0517
Thank you for your kindness it’s my wife’s pontoon and I’m trying to have it done by Christmas so she can use it next summer I forgot I need remnant 6”x6” to repair a small slice in the vinyl.
Question by: Rick Hubert on Nov 13, 2023, 2:42 PM
Hi Rick,
Since we aren't dealers, I'm afraid we don't know what specific decals those are or what they look like. If you can email some photos, we can try that way. Other wise, you'd pretty much need to scroll through our current Godfrey graphics to see if you recognize them.
link: https://www.greatlakesskipper.com/search/?q=godfrey+decals
Unfortunately, they aren't something we can source or order.
Sorry we could not help more.
Gene
Since we aren't dealers, I'm afraid we don't know what specific decals those are or what they look like. If you can email some photos, we can try that way. Other wise, you'd pretty much need to scroll through our current Godfrey graphics to see if you recognize them.
link: https://www.greatlakesskipper.com/search/?q=godfrey+decals
Unfortunately, they aren't something we can source or order.
Sorry we could not help more.
Gene
Answer by: Admin on Nov 14, 2023, 7:41 AM