Jabsco Boat Macerator Pump 18590-2092 | 12V 16A Self Priming

Boat part number 1092599 is a new sealed macerator self priming pump from Jabsco, part number 18590-2092 .
made for Custom Applications
$139.95 MSRP: $179.09
GLS Stock #: 1092599-GA452
Only 2 left

Jabsco Boat Macerator Pump 18590-2092 | 12V 16A Self Priming

Boat part number 1092599 is a new sealed macerator self priming pump from Jabsco, part number 18590-2092 .

The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation

Features:
  • 12 GPM flow rate
  • 1 1/2 in. hose barb & NPT inlet port
  • 1 in. hose barb discharge port
  • Sensor device provides adequate run-dry period for initial priming of the pump
  • Run dry sensor detects the absence of fluid and shuts off the pump before impeller is damaged
  • 12 volt DC operation
  • Fully sealed motor prevent motor corrosion and premature failure
  • Heavy duty four-bladed chopper reduces clogging
  • Self-priming to 4 ft. vertical lift
Specifications:
  • Boat Manufacturer: Unavailable
  • Part Manufacturer: Jabsco
  • Part Number: 18590-2092
  • Color: Black
  • Overall Dimensions: 11 3/8" L x 4 3/4" W x 3 5/8" H
  • Mount: (4) 3/8" Dia. holes

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.