Kenner Boat Dash Panel 107698 | Teleflex Amega 20 3/4 x 6 1/8 Inch

Boat part number 1089624 is a new dash panel for Kenner Boats, part number 107698 .
made for Custom Applications
$369.95 MSRP: $499.43
GLS Stock #: 1089624-5B326
Only 1 left

Kenner Boat Dash Panel 107698 | Teleflex Amega 20 3/4 x 6 1/8 Inch

Boat part number 1089624 is a new dash panel for Kenner Boats, part number 107698 .

This dash panel is constructed from black marine grade plastic with a matte finish. It measures approximately 20 3/4" W x 6 1/8" H overall and has (8) 1/8" Dia. mounting holes.

This panel has (3) pre-installed Amega gauges from Teleflex Marine. Each clear halogen bulb illuminated gauge has a domed lens, black bezel, black face, white needle, and white / red graphics.

This panel features the following gauges:
  • (1) Speedometer | P/N: 57900 | (1) pitot connection
  • (1) Tachometer w/ Systems Check | P/N: 58935 | Gasoline | 4/6/8 cylinder inboard and 2/3/4/5/6 pole outboard
  • (1) Volt Meter | P/N: 57901
This panel features the following pre-installed red illuminated rocker switches:
  • (1) Master Power | ON/OFF
  • (1) Lights NAV/ANC | ON/OFF
  • (1) Bilge | ON/OFF
  • (1) Livewell | ON/OFF
  • (2) Accessory | ON/OFF
Has the following connections:
  • (1) 5-pin female
  • (4) single female pin
Note: Contains minor scuff on edge, see photos.

Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.

Specifications:
  • Boat Manufacturer: Kenner
  • Model/Year: Unavailable
  • Part Number: 107698
  • Part Manufacturer: Unavailable
  • Material: Plastic
  • Color: Black
  • Finish: Matte
  • Overall Dimensions: 20 3/4" W x 6 1/8" H
  • Mounts: (8) 1/8" Dia. mounting holes
  • Fuel: Gasoline
  • Set Up For: 4/6/8 cylinder inboard and 2/3/4/5/6 pole outboard
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.