
Larson Boat Access Plate 4258-9373 | 4 1/2 Inch White
Boat part number 8600395 is a new access plate from Larson Boats, part number 4258-9373 .
made for Larson Boats
$9.95 MSRP: $13.43
GLS Stock #: 8600395-BW088
29 in stock
Boat part number 8600395 is a new access plate from Larson Boats, part number 4258-9373 . May be used on other boats.
This access plate is constructed from white colored marine plastic with a fine textured finish. Features twist-to-open face. Mounts via (6) 3/16" Dia. countersunk holes set around the perimeter.
Approximate Measurements:
This access plate is constructed from white colored marine plastic with a fine textured finish. Features twist-to-open face. Mounts via (6) 3/16" Dia. countersunk holes set around the perimeter.
Approximate Measurements:
- Overall: 5 3/4" Dia.
- Cutout: 4 1/2" Dia.
- Opening: 3 7/8" Dia.
- Boat Manufacturer: Larson
- Model/Year: Unavailable
- Part Number: 4258-9373
- Material: Marine Plastic
- Color: White
- Overall Dimensions: 5 3/4" Dia.
- Cutout Dimensions: 4 1/2" Dia.
- Mounts: (6) 3/16" Mounting Holes Set Around the Perimeter
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
I have a 5 inch cut out ( hole) I’m trying to cover with a deck plate. I see this fits a 4.5 inch cut out so my question is…will the screw holes catch the outer edge of my 5 inch cut out to secure the deck plate ? If not…do you have a deck plate in any color that will fit my 5 inch cut out ? Thank you for your help…Tony.
Question by: Antony Hunt on Aug 30, 2022, 10:01 AM
Hi Antony,
Just had one brought to me, and I measured from the very outside of the mounting holes, straight across the other outside. It is almost precisely 5", so it's going to be very close. I think you'd be ok, because there is still about 1/4" flange left.
Gene
Just had one brought to me, and I measured from the very outside of the mounting holes, straight across the other outside. It is almost precisely 5", so it's going to be very close. I think you'd be ok, because there is still about 1/4" flange left.
Gene
Answer by: Admin on Aug 30, 2022, 10:35 AM