Larson Boat Decal Sticker | 24 x 3 Inch Silver Metallic Green - All Questions
Larson Boat Decal Sticker | 24 x 3 Inch Silver Metallic Green
SKU
1005706
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
This is exactly the decal I am looking for, but I need it in GOLD. Is gold available ?? Thank you.
Question by: Deb Trewhitt on May 5, 2022, 3:22 PM
Hello Deb,
Unfortunately, we do not currently have in gold, and they are not something we can source or order. Sorry.
Gene
Unfortunately, we do not currently have in gold, and they are not something we can source or order. Sorry.
Gene
Answer by: Admin on May 6, 2022, 8:47 AM
does this part number include left and right side decals
Question by: jeff berg on May 6, 2022, 9:40 AM
Hello Jeff,
Sorry, this is just a single decal. I think though, they can be used on either side.
Gene
Sorry, this is just a single decal. I think though, they can be used on either side.
Gene
Answer by: Admin on May 6, 2022, 10:25 AM
Is this decal for the outside of the boat on the fiberglass or for an example to go on the back of the back bench seat on the vinyl?
Question by: Sue on Jun 20, 2023, 8:31 PM
Hello Sue,
I'm afraid we don't know where Larson originally intended them to be used. They came to us from Larson with no part numbers, or description. Sorry.
Gene
I'm afraid we don't know where Larson originally intended them to be used. They came to us from Larson with no part numbers, or description. Sorry.
Gene
Answer by: Admin on Jun 21, 2023, 10:44 AM