Lowe Boat Gauge Panel 2152213620 | Sterling Black Mercury 20 3/8 Inch

Boat part number 7800197 is a new gauge dash panel for Lowe Boats, part number 2152213620 .
made for Lowe Boats
$289.95 MSRP: $391.43
GLS Stock #: 7800197-5K414
Only 4 left

Lowe Boat Gauge Panel 2152213620 | Sterling Black Mercury 20 3/8 Inch

Boat part number 7800197 is a new gauge dash panel for Lowe Boats, part number 2152213620 .

This gauge dash panel is constructed out of glossy, black and silver carbon fiber patterned plastic. It measures approximately 20 3/8" W x 9 3/4" H overall and (1) 8" W x 4 1/2" H cutout. It has (4) 1/8" Dia. mounting holes (hardware not included).

This panel has (2) pre-installed Sterling Black series gauges from Teleflex Marine. Each clear halogen bulb illuminated gauge has domed lens, silver colored bezel, black/silver face, orange-tipped black needle, and white graphics.

This panel features the following gauges:
  • (1) Multi-Function Speedometer/Fuel | 65 MPH | (1) Pitot Connection |P/N: 69264F
  • (1) Multi-Function Tachometer/Trim | Set Up For: 2/3/4/5/6 Poles / 4/6/8 Cylinders | Mercury Engines | P/N: 70161F
Specifications:
  • Boat Manufacturer: Lowe Boats
  • Part Number: 2152213620
  • Part Manufacturer: Unavailable
  • Material: Plastic
  • Color: Black / Silver
  • Finish: Glossy / Carbon Fiber Patterned
  • Overall Dimensions: 20 3/8" W x 9 3/4" H
  • Mounts: (4) 1/8" Dia. Holes
  • Fuel: Gasoline
  • Set Up For: 4/6/8 Cylinder Inboards / 2/3/4/5/6 Pole Outboards
  • Used on These Engines: Mercury Engines
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.