Loading...

Lowe Boat Gauge Panel Console 2349510 | 24 3/4 Inch Black

Boat part number 7801467 is a new gauge panel side console for Lowe Boats, part number 2349510 .
made for Lowe Boats
$799.95 MSRP: $1,079.93
GLS Stock #: 7801467-PJ468
Only 3 left
Boat part number 7801467 is a new gauge panel side console for Lowe Boats, part number 2349510 . Manufactured by MEP, part number unavailable.

This gauge panel console is constructed out of black fiberglass and measures approximately 24 3/4" W x 22 1/2" D x 15 3/4" H overall. Features (1) 3 1/4" Dia. cutout and (1) 5 3/4" W x 3" H cutout. Features a 12V power receptacle and a fuse block.

Includes the following switches:
  • (1) NAV / ANC | ON/OFF/ON | Rocker
  • (1) BILGE / ACC | ON/OFF/ON | Rocker
  • (1) AERATOR | OFF / ON | Rocker
  • (1) ACC | OFF / ON | Rocker
  • (1) HORN | MOMENTARY ON / OFF | Push Button
Includes the following gauges:
  • (1) Tachometer | P/N: 61546 | Gasoline | 4/6/8 Cylinders , 2/3/4/5/6 Pulses
  • (1) Speedometer | P/N: 62372 | 65 MPH | Pitot Connection
  • (1) Trim | P/N: 61551 | Mercury / Volvo / Yamaha
  • (1) Fuel | P/N: 61549 | 35 - 240Ω (Ohms)
Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.

Specifications:
  • Boat Manufacturer: Lowe Boats
  • Part Number: 2349510
  • Part Manufacturer: MEP
  • Part Number: Unavailable
  • Material: Fiberglass
  • Color: Black
  • Finish: Matte
  • Overall Dimensions: 24 3/4" W x 22 1/2" D x 15 3/4" H
  • Connections: (4) Female Bullets, (1) 15-Pin Male, (1) 4-Pin Male

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

NOTE: This fuse block does come complete with fuses, but we cannot predetermine what the amperages of the fuses you will receive. You could receive all of one amp, or any combination of amperages - from 2 to 20. The photo shown is just one of the combinations the fuses can come in.

Product Questions

Pontoon
Can this console be mounted on a plywood box?
Question by: Rick denton on Feb 18, 2023, 6:25 AM
Hi Rick,

We haven't seen it done, but sure don't know why it couldn't. Understand though that will it sits basically flat, there would be maybe a 3" or 4" gap that you'd want to fill with something.

Gene
Answer by: Admin on Feb 20, 2023, 12:32 PM