Loading...

Lowe Boat Gauge Panel F2152160425 | I/O Mercury 21 1/2 x 10 Inch

Boat part number 7800174 is a new gauge panel for Lowe Boats, part number unavailable.
made for Lowe Boats
$189.95 MSRP: $438.68
GLS Stock #: 7800174-FF754
60 in stock
Boat part number 7800174 is a new gauge panel for Lowe Boats, part number unavailable. Part manufacturer unavailable, part number F2152160425 .

This gauge panel is constructed from black and gray carbon fiber patterned plastic with a glossy finish. It measures approximately 21 1/2" W x 10" H overall. Has (1) 3 1/4" W x 5 1/4" H blank cutout.

This panel has (4) pre-installed Lido series gauges from Teleflex Marine. Each clear halogen bulb illuminated gauge has domed lens, silver colored bezel, white face, orange-tipped black needle, and black graphics.

This panel features the following gauges:
  • (1) Tachometer | 7000RPM | P/N: 59737 | Gasoline | Set Up For: 4/6/8 Cylinder Inboards and 2/3/4/5/6/12 Pole Outboards | (6) Threaded Bolts
  • (1) Speedometer | 65 MPH | P/N: 59713 | (1) Pitot Connection
  • (1) Trim | P/N: 59657 | Set Up For: Mercury / Volvo / Yamaha (2001 - 2011) Engines
  • (1) Fuel | P/N: 59655
Has the following connections:
  • (2) 4-pin male
  • (2) single pin female
Note: Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.

Specifications:
  • Boat Manufacturer: Lowe
  • Model/Year: Unavailable
  • Part Number: Unavailable
  • Part Manufacturer: Unavailable
  • Part Number: F2152160425
  • Material: Plastic
  • Color: Black / Gray
  • Pattern: Carbon Fiber
  • Finish: Glossy
  • Overall Dimensions: 21 1/2" W x 10" H
  • Mounts: None
  • Fuel: Gasoline
  • Set Up For: 4/6/8 Cylinder Inboards and 2/3/4/5/6/12 Pole Outboards
  • Used on These Engines: Mercury / Volvo / Yamaha (2001 - 2011) Engines

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.

Product Questions

No questions yet. Be the first to ask the question!