Lund Boat Fuel Sending Unit 1745002 | 11 7/8 x 2 7/8 Inch 30 - 240 Ohms
Boat part number 8304559 is a new fuel sending unit for Lund Boats, part number 1745002 .
made for Lund Boats
$59.95 MSRP: $80.93
GLS Stock #: 8304559-BW742
Only 5 left
Boat part number 8304559 is a new fuel sending unit for Lund Boats, part number 1745002 .
This fuel sending unit is constructed out of stainless steel with a rubber float. It measures approximately 11 7/8" L x 2 7/8" Dia. overall with a maximum tank depth of approximately 11". It is rated for 30 - 240 ohms and connects via (2) raw wire leads.
Specifications:
This fuel sending unit is constructed out of stainless steel with a rubber float. It measures approximately 11 7/8" L x 2 7/8" Dia. overall with a maximum tank depth of approximately 11". It is rated for 30 - 240 ohms and connects via (2) raw wire leads.
Specifications:
- Boat Manufacturer: Lund Boats
- Part Number: 1745002
- Material: Stainless Steel
- Color: Silver
- Finish: Polished
- Frequency: 30 - 240 Ohms
- Overall Dimensions: 11 7/8" L x 2 7/8" Dia.
- Shaft Diameter: 3/8" Dia.
- Maximum Tank Depth: 11"
- Connections: (2) Raw Wire Leads
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Looking for new fuel sending unit for 1991 Lund Pro V. How do I know which unit fits?
Question by: Dave Neish on Jun 22, 2023, 8:27 AM
Hi Dave,
I'm afraid we don't have any way to cross reference sending units to specific boats. We would need to know the depth of your fuel tank, and ideally a photo of your fuel gauge. Chances are the gauge is a standard 30-240 ohm gauge, and we can usually tell just by looking at it. You can reply to this email with photos.
Gene
I'm afraid we don't have any way to cross reference sending units to specific boats. We would need to know the depth of your fuel tank, and ideally a photo of your fuel gauge. Chances are the gauge is a standard 30-240 ohm gauge, and we can usually tell just by looking at it. You can reply to this email with photos.
Gene
Answer by: Admin on Jun 22, 2023, 10:47 AM
This is for a 2004 17' Lund Mr Pike, the gas tank measures 9" high, do you measure the float rod and cut off the excess?
Question by: Dave Penning on Jun 8, 2023, 3:07 PM
Hi Dave,
This particular unit cannot be cut/modified to make it shorter, so it won't fit your tank. You'd probably need something in the 8"-8 1/2" range. Maybe this one?
link: https://www.greatlakesskipper.com/wema-boat-gas-fuel-sending-unit-8-1-2-inch-30-240-ohm
Gene
This particular unit cannot be cut/modified to make it shorter, so it won't fit your tank. You'd probably need something in the 8"-8 1/2" range. Maybe this one?
link: https://www.greatlakesskipper.com/wema-boat-gas-fuel-sending-unit-8-1-2-inch-30-240-ohm
Gene
Answer by: Admin on Jun 9, 2023, 8:19 AM