Lund Boat Gauge Dash Panel 2116276 | 1775 / 1875 Pro-V Gray
Boat part number 8302725 is a new gauge dash panel for a 2014 Lund 1775 / 1875 Pro-V Boat, part number 2116276 .
made for Lund Boats
$249.95 MSRP: $337.43
GLS Stock #: 8302725-FJ632
Only 3 left
Boat part number 8302725 is a new gauge dash panel for a 2014 Lund 1775 / 1875 Pro-V Boat, part number 2116276 .
This panel is constructed out of marine grade plastic in a gray color, measures approximately 14" L x 4 7/8" H overall. Features (4) pre-stalled Driftwood Series gauges from Teleflex. These clear halogen bulb gauges feature black bezels, domed lens, gray face, black lettering, numerals, accents, and white needles.
The pre-installed gauges are as follows:
This panel is constructed out of marine grade plastic in a gray color, measures approximately 14" L x 4 7/8" H overall. Features (4) pre-stalled Driftwood Series gauges from Teleflex. These clear halogen bulb gauges feature black bezels, domed lens, gray face, black lettering, numerals, accents, and white needles.
The pre-installed gauges are as follows:
- (1) Fuel Gauge | 61549F | Has (3) threaded bolt connectors.
- (1) 65 MPH Speedometer | 62372F | Has pitot connector.
- (1) 7000 RPM Tachometer | 62371F | Has (4) threaded bolt connectors | Set up for 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses.
- (1) Trim Gauge | 62375F | Has (3) threaded bolt connectors | Set up for Honda engines.
- Boat Manufacturer: Lund
- Model: 1775 Pro-V / 1875 Pro-V
- Year: 2014
- Part Number: 2116276
- Materials: Plastic
- Color: Gray
- Finish: Glossy
- Overall Dimensions: 14" L x 4 7/8"
- Connection: (1) 2-Spade Male and (4) Single Bullet connectors
- Tachometer set up for 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses
- Trim set up for Honda engines
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.