Lund Boat Gauge Dash Panel 2141764 | Sport Angler Mercury Silver

Boat part number 8303240 is a new OEM gauge and switch dash panel for 2016 Lund Sport Angler boats, part number 2141764 .
made for Lund Boats
$349.95 MSRP: $472.43
GLS Stock #: 8303240-FF691
Only 2 left

Lund Boat Gauge Dash Panel 2141764 | Sport Angler Mercury Silver

Boat part number 8303240 is a new OEM gauge and switch dash panel for 2016 Lund Sport Angler boats, part number 2141764 .

This gauge panel is constructed from silver marine grade plastic with a brushed pattern and a glossy finish. It features (1) open storage compartment and (1) 1 1/2" Dia. cutout. It measures approximately 30" W x 5 3/4" H x 5" D overall. It has (1) single pin female, (1) single spade male, (1) 11-spade male, and (1) 13-spade female connections. There are (8) 1/8" Dia. mounting holes (hardware not included).

This panel has (3) pre-installed gauges from Mercury Marine. Each clear halogen bulb illuminated gauge has a domed lens, silver colored bezel, white face, black/orange needle, and black graphics.

This panel features the following gauges:
  • (1) Speedometer | 895285A43 | (2) single male spades and (1) pitot connection
  • (1) Fuel | 895291A41 | (1) single male spade and (3) threaded connections
  • (1) Tachometer | 895283A45 | Gasoline Fuel | 4 / 6 / 8 cylinder inboard and 2 / 3 / 4 / 5 / 6 pole outboard engines
This panel features the following pre-installed switches:
  • (1) Master Power ON/OFF Rocker Switch
  • (1) AUTO LVWL MAN ON/OFF/ON Rocker Switch
  • (1) AUTO RECIRC MAN ON/OFF/ON Rocker Switch
  • (1) NAV LIGHTS ANC ON/OFF/ON Rocker Switch
  • (1) INT LT ACC ON/OFF Rocker Switch
  • (1) Bilge ON/OFF Illuminated Rocker Switch
  • (1) Red Horn Momentary ON/OFF Rocker Switch
  • (1) 12V Receptacle
Specifications:
  • Boat Manufacturer: Lund
  • Model: Sport Angler
  • Year: 2016
  • Part Number: 2141764
  • Part Manufacturer: Unavailable
  • Material: Plastic
  • Color: Silver
  • Pattern: Brushed
  • Finish: Glossy
  • Overall Dimensions: 30" W x 5 3/4" H x 5" D
  • Mounts: (8) 1/8" Dia. mounting holes
  • Fuel: Gasoline
  • Set Up For: 4 / 6 / 8 cylinder inboard and 2 / 3 / 4 / 5 / 6 pole outboard engines

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.