Lund Boat Gauge Dash Panel | Speedometer Tachometer 8 3/4 x 4 Inch
Boat part number 8303214 is a new OEM dash gauge panel for Lund boats, part number 2193214 .
made for Lund Boats
$149.95 MSRP: $201.50
GLS Stock #: 8303214-AK444
Only 4 left
Boat part number 8303214 is a new OEM dash gauge panel for Lund boats, part number 2193214 .
This gauge panel is constructed from marine grade plastic. The color is called ebony stardust per manufacturer; we see it as black with a metallic silver speckle and high gloss finish. It measures approximately 8 3/4" W x 4" H overall. It has (3) single-pin male connections.
This panel has (2) pre-installed Sterling Silver / Black series gauges from Teleflex Marine. Each clear halogen bulb illuminated gauge features a domed lens, silver colored bezel, black face, orange/black needle, and silver/white graphics.
This panel features the following gauges:
This gauge panel is constructed from marine grade plastic. The color is called ebony stardust per manufacturer; we see it as black with a metallic silver speckle and high gloss finish. It measures approximately 8 3/4" W x 4" H overall. It has (3) single-pin male connections.
This panel has (2) pre-installed Sterling Silver / Black series gauges from Teleflex Marine. Each clear halogen bulb illuminated gauge features a domed lens, silver colored bezel, black face, orange/black needle, and silver/white graphics.
This panel features the following gauges:
- (1) Tachometer | 780821PMFB | Gasoline Fuel | 4 / 6 / 8 cylinder inboard and 2 / 3 / 4 / 5 / 6 pole outboard | (1) 4-spade male and (1) threaded connection
- (1) Speedometer | 67285F | (2) male spades and (1) pitot connection
- Boat Manufacturer: Lund
- Part Number: 2193214
- Part Manufacturer: Unavailable
- Material: Plastic
- Color: Ebony Stardust (Black w/ Metallic Speckles)
- Overall Dimensions: 8 3/4" W x 4" H
- Fuel: Gasoline
- Set Up For: 4 / 6 / 8 cylinder inboard and 2 / 3 / 4 / 5 / 6 pole outboard
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.