Lund Boat Gauge Panel 2116277 | 18 7/8 x 5 1/2 Inch Driftwood Series
Boat part number 8302745 is a new OEM gauge panel from Lund, part number 2116277 .
made for Lund Boats
$274.95 MSRP: $371.18
GLS Stock #: 8302745-XIN4626FB817
Only 2 left
Boat part number 8302745 is a new OEM gauge panel from Lund, part number 2116277 .
Constructed out of marine grade plastic in a grey color with a glossy finish. Measuring approximately 18 7/8" L x 5 1/2" H overall. This panel hosts (5) 1/8" Dia. threaded mounting bolts on the back. Features (4) pre-installed Driftwood Black series gauges from Teleflex. These gauges feature domed lenses, gray faces, white needles, black lettering, numerals, and accents.
The gauges are as follows:
Constructed out of marine grade plastic in a grey color with a glossy finish. Measuring approximately 18 7/8" L x 5 1/2" H overall. This panel hosts (5) 1/8" Dia. threaded mounting bolts on the back. Features (4) pre-installed Driftwood Black series gauges from Teleflex. These gauges feature domed lenses, gray faces, white needles, black lettering, numerals, and accents.
The gauges are as follows:
- (1) Fuel Gauge | 61549F | Has (3) threaded bolt connectors.
- (1) 65 MPH Speedometer | 62372F | Has Pitot connector.
- (1) 7000 RPM Tachometer | 62371F | Has (4) threaded bolt connectors. Set up for 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses.
- (1) Trim Gauge | 62375F | Has (3) threaded bolt connectors. Set up for Honda Engines.
- Boat Manufacturer: Lund
- Part Number: 2116277
- Material: Plastic
- Color: Faux Woodgrain
- Finish: Glossy
- Overall Dimensions: 18 7/8" L x 5 1/2" H
- Connections: (1) 2 spade male (4) single bullet connectors
- Tachometer Set Up For 4/6/8 Cylinders or 2/3/4/5/6 Outboard Pulses Engines.
- Trim Set Up For Honda Engines.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.