Lund Boat Gauge Panel 2244180 | 14 7/8 x 5 1/2 Inch Faux Woodgrain
Boat part number 8304032 is a new gauge panel for Lund Boats, part number 2244180 .
made for Lund Boats
$249.95 MSRP: $337.43
GLS Stock #: 8304032-FC723
Only 2 left
Boat part number 8304032 is a new gauge panel for Lund Boats, part number 2244180 .
This gauge panel is constructed out of glossy black / silver faux woodgrain patterned plastic. It measures approximately 14 7/8" L x 5 1/2" H overall and has (3) single pin female, (1) single spade female, (1) 2-pin male, and (2) 4-active pin male connections. Features (3) pre-installed Teleflex gauges that have domed lenses, matte black bezels, gray faces, white needles, and black graphics.
This panel features the following gauges:
Hardware and instruction / installation manual not included.
This gauge panel is constructed out of glossy black / silver faux woodgrain patterned plastic. It measures approximately 14 7/8" L x 5 1/2" H overall and has (3) single pin female, (1) single spade female, (1) 2-pin male, and (2) 4-active pin male connections. Features (3) pre-installed Teleflex gauges that have domed lenses, matte black bezels, gray faces, white needles, and black graphics.
This panel features the following gauges:
- (1) Tachometer | 7000 RPM | P/N: 61546F | Set Up For: 4/6/8 Cycles Inboard / 2/3/4/5/6 Poles Outboard | Gasoline
- (1) Speedometer | 65 MPH (100 km/h) | P/N: 62372F | (1) Pitot Connection
- (1) Fuel | P/N: 61549F
- (1) 2 1/8" Dia. Cutout
- Boat Manufacturer: Lund Boats
- Part Number: 2244180
- Part Manufacturer: Unavailable
- Material: Plastics
- Color: Black / Silver Faux Woodgrain
- Finish: Glossy
- Overall Dimensions: 14 7/8" L x 5 1/2" H
Hardware and instruction / installation manual not included.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.