Malibu Boat Raised Emblem Decal 5992913 | 32 1/4 x 6 Inch Black - All Questions
Malibu Boat Raised Emblem Decal 5992913 | 32 1/4 x 6 Inch Black
SKU
1097741
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Can you get it in white?
Question by: Adam Swiatek on May 20, 2022, 1:46 PM
Hello Adam,
Unfortunately, we do not currently have in white, and they are not something we can source or order. Sorry.
Gene
Unfortunately, we do not currently have in white, and they are not something we can source or order. Sorry.
Gene
Answer by: Admin on May 20, 2022, 2:17 PM
Would this decal be consistent with the original decal for a 2002 sunscape LSv in border color and size?
Question by: Wayne on May 3, 2023, 12:30 PM
Hello Wayne,
I am sorry, but we aren't dealers, and aren't familiar with what was on your LSV. About all we can suggest is to contact a dealer and give them that 5992913 Malibu part number.
Gene
I am sorry, but we aren't dealers, and aren't familiar with what was on your LSV. About all we can suggest is to contact a dealer and give them that 5992913 Malibu part number.
Gene
Answer by: Admin on May 3, 2023, 2:10 PM
Is this available in red? I have a 2018 M235 and the “M” got damaged by the dock. Thank you for your time and consideration.
Question by: Jason Scott on May 14, 2023, 9:41 PM
Hello Jason,
Unfortunately, we do not currently have in red, and they are not something we can source or order. Sorry.
Gene
Unfortunately, we do not currently have in red, and they are not something we can source or order. Sorry.
Gene
Answer by: Admin on May 15, 2023, 10:15 AM