MasterCraft Boat Emblem Decal Stickers 758300 | OEM MariStar Red (Pair) - All Questions
MasterCraft Boat Emblem Decal Stickers 758300 | OEM MariStar Red (Pair)
$79.95 MSRP: $161.99
SKU
1030786
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
I am looking for the hull Maristar decals for a 230 VRS in green. Do you have any of those?
Question by: William Titus on Jun 20, 2022, 4:50 PM
Hello William,
Since we aren't Mastecraft dealers/distributors, I'm afraid we don't know what exactly those decals look like, or have the Mastercraft part number available to us. If you can get a part number from a dealer, we can try that way. Otherwise you'd pretty much need to scroll through our current options at the link below to see if you recognize them.
Link: https://www.greatlakesskipper.com/decals-pinstriping/mastercraft-decals
Sorry we could not help more.
Gene
Since we aren't Mastecraft dealers/distributors, I'm afraid we don't know what exactly those decals look like, or have the Mastercraft part number available to us. If you can get a part number from a dealer, we can try that way. Otherwise you'd pretty much need to scroll through our current options at the link below to see if you recognize them.
Link: https://www.greatlakesskipper.com/decals-pinstriping/mastercraft-decals
Sorry we could not help more.
Gene
Answer by: Admin on Jun 21, 2022, 8:32 AM