Parker Boat Seal Molding 122107 | Dual Adhesive 1 1/2 Inch (FT)
Boat part number 1092048 is a new, off the roll, increment of black dual seal molding for Parker Boats, part number 122107 .
made for Parker Boats
$2.49 MSRP: $3.36
GLS Stock #: 1092048-PK532
500 in stock
Boat part number 1092048 is a new, off the roll, increment of black dual seal molding for Parker Boats, part number 122107 . Manufacturer unavailable, part number PS20003M135ID .
This D-shaped double open cell seal molding is constructed out of black foam rubber and measures approximately 1 1/2" W x 1/2" H overall. The open cells each measure approximately 1/2" W x 1/4" H and features (2) 5/8" W adhesive strips on the back for easy installation.
Note: Cells are connected at the bottom ONLY and can be slightly separated.
Sold by the running foot. Simply enter the number of feet needed in the quantity field. Lengths are sold as continuous feet.
Specifications:
This D-shaped double open cell seal molding is constructed out of black foam rubber and measures approximately 1 1/2" W x 1/2" H overall. The open cells each measure approximately 1/2" W x 1/4" H and features (2) 5/8" W adhesive strips on the back for easy installation.
Note: Cells are connected at the bottom ONLY and can be slightly separated.
Sold by the running foot. Simply enter the number of feet needed in the quantity field. Lengths are sold as continuous feet.
Specifications:
- Boat Manufacturer: Parker Boats
- Part Number: 122107
- Part Manufacturer: Unavailable
- Part Number: PS20003M135ID
- Color: Black
- Material: Foam Rubber
- Overall Dimensions: 1 1/2" W x 1/2" H
- Length: Sold by the foot
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
This product is cut to length and we cannot accept returns or cancellations on any cut to length product.