Loading...

Premier Boat Dash Panel K-388-018 | 32 x 8 1/2 Inch Vinyl Black Silver

Boat part number 1052972 is a new OEM gauge dash panel for Premier Pontoon boats, part number K-388-018 .
made for Premier Pontoons
$289.95 MSRP: $391.43
GLS Stock #: 1052972-XIN4136FC807
Only 5 left
Boat part number 1052972 is a new OEM gauge dash panel for Premier Pontoon boats, part number K-388-018 .

This gauge panel is constructed from black vinyl covered plastic with brushed silver accents. It measures approximately 32" L x 8 1/2" H x 10 1/2" D overall. There is (1) 11-pin male and (1) 4-pin female connection.

This panel has (7) pre-installed Spun Silver series gauges from Faria. Each gauge has a domed lens, silver colored bezel, brushed silver face, and black needle with black graphics.

This panel features the following gauges:
  • (1) Tachometer | TC9004B | Gasoline | 4 / 6 / 8 / 10 / 12 cylinder inboard and 1 / 2 / 3 / 4 / 5 pole outboard engines | (1) single male spade and (4) threaded connections
  • (1) Fuel Level | GP9932A | (1) single male spade and (3) threaded connections
  • (1) Volt Meter | VP9223A | (1) single male spade and (3) threaded connections
  • (1) Speedometer | SE9401B | (1) pitot connection and (2) single male spades
  • (3) Blank Gauges | BL9694A
This panel features the following pre-installed switches:
  • (1) Horn Momentary ON/OFF rocker switch
  • (1) Docking Lights ON/OFF illuminated rocker switch
  • (1) Navigation Lights ON/OFF/ON illuminated rocker switch
  • (1) Courtesy Lights ON/OFF illuminated rocker switch
  • (1) Mood Light ON/OFF illuminated rocker switch
  • (1) Accessory ON/OFF illuminated rocker switch
  • (6) Push to reset breaker switches
Specifications:
  • Boat Manufacturer: Premier Pontoons
  • Part Number: K-388-018
  • Part Manufacturer: Unavailable
  • Material: Plastic / Vinyl
  • Color: Black / Silver
  • Finish: Matte / Glossy
  • Overall Dimensions: 32" L x 8 1/2" H x 10 1/2" D
  • Fuel: Gasoline
  • Set Up For: 4 / 6 / 8 / 10 / 12 cylinder inboard and 1 / 2 / 3 / 4 / 5 pole outboard engines

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.

Product Questions

can i used this whit evinrude 225?
Question by: FRANCISCO CAMACHO on Jul 17, 2022, 12:07 PM
Hello Francisco,

Yes, it sure can!

The tachometer will work with your 225 (set switch on back to 12 pole)

The other gauges aren't connected to the motor directly. Is a 35 MPH speedometer ok for a 225? Seem like you'd want something like 50 MPH or more.

Gene
Answer by: Admin on Jul 18, 2022, 8:45 AM