Ranger 1945730 Attwood 6312-2 Clear LED 16 Volt Water Reistant Boat Livewell / Baitwell Light
Perfect lighting for low-current, all-weather and submersible applications, especially thru-hull style mounting on livewell tanks and baitwells.
This white light illuminated LED livewell / baitwell light features a domed surface, two thin black rubber gaskets, threaded mount and two raw ended wires, (1) black and (1) white. Measures approximately 1 1/2" diameter across the face x 1 5/8" D overall. Gasket and washer included.
Features Per Manufacturer:
- 1 LED for ultra-low current draw
- Underwater rated, suitable for installation directly into side of livewell
- One piece molded housing, water resistant gasket, and tightening nut
- One 7/8" installation hole
- Max wall thickness 3/4"
- Operates on 9-16 Volts DC
- 90% less battery drain than comparable-output incandescent
- Cool to the touch
- Boat Manufacturer: Ranger
- Part Number: 1945730
- Part Manufacturer: Attwood
- Part Number: 6312-2
- Material: Plastic
- Color: Clear
- Illuminates: White
- Electrical: 9-16 Volts DC
- Max Wall Thickness: 3/4" D
- Overall Dimensions: 1 1/2" Dia. x 1 5/8" D
- Cutout: 7/8" Dia.
- Connection: (1) Black and (1) Red raw ended wires
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual included.
Hardware not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.