Ranger Boat Logo Display Gauge 5532143 | Beede 3 3/8 Inch 960911
Boat part number 7101219 is a new custom logo display gauge for Ranger Boats, part number 5532143 .
made for Ranger Boats
$39.95 MSRP: $53.93
GLS Stock #: 7101219-BP613
61 in stock
Boat part number 7101219 is a new custom logo display gauge for Ranger Boats, part number 5532143 . Manufacturer by Beede, part number 960911 .
This blank display gauge features "Ranger Boats" logo across face, domed lens, silver bezel, black face, red and white colored lettering. Measures approximately 3 3/4" diameter cutout by 3 1/8" deep overall. Hosts (2) single spade male connectors. Requires an approximate 3 3/8"diameter cutout. Mounting bracket included.
Specifications:
This blank display gauge features "Ranger Boats" logo across face, domed lens, silver bezel, black face, red and white colored lettering. Measures approximately 3 3/4" diameter cutout by 3 1/8" deep overall. Hosts (2) single spade male connectors. Requires an approximate 3 3/8"diameter cutout. Mounting bracket included.
Specifications:
- Boat Manufacturer: Ranger
- Part Number: 5532143
- Part Manufacturer: Beede
- Part Number: 960911
- Illuminated: Yes
- Colors: Silver / Black / Red
- Overall Dimensions: 3 3/4" Dia. x 3 1/8" D.
- Cutout: 3 3/8" Dia.
- Connection: (2) Single Spade Male
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
Product Questions
If all this gauge does is light up why so many connecting points
Question by: Mike Murphy on May 27, 2021, 8:34 AM
Hello Mike,
The only connections are up by the light. Then you have the posts which are for mounting the gauge in a console.
Ethan
The only connections are up by the light. Then you have the posts which are for mounting the gauge in a console.
Ethan
Answer by: Ethan Doro on May 27, 2021, 12:25 PM