Ranger Boat Raised Decal Emblem 7604313 | Silver Sticker Polished - All Questions
Ranger Boat Raised Decal Emblem 7604313 | Silver Sticker Polished
SKU
8105241
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Is this decal original equipment for a 2004 Ranger 195vs ?
Question by: Larry Phillips on Jul 19, 2022, 10:50 AM
Hi Larry,
I'm sorry, but we don't know what specific models/model years it was originally designed for. About all we can suggest is to contact a dealer and give them that 7604313 Ranger part number.
Gene
I'm sorry, but we don't know what specific models/model years it was originally designed for. About all we can suggest is to contact a dealer and give them that 7604313 Ranger part number.
Gene
Answer by: Admin on Jul 19, 2022, 11:30 AM
This does come with 2 emblems ?
Question by: Andrew on Jan 27, 2023, 8:55 PM
Hello Andrew,
Sorry no, this is just a single decal.
Gene
Sorry no, this is just a single decal.
Gene
Answer by: Admin on Jan 30, 2023, 10:47 AM
Is this the side emblem on the side of a 2020 621 FS pro Ranger?
Question by: Kerry carlson on Jun 9, 2023, 11:44 AM
Hello Kerry,
I'm afraid we do not know. We aren't dealers and don't know where Ranger originally used them. About all we can suggest is to contact a Ranger dealer.
Sorry we could not help.
Gene
I'm afraid we do not know. We aren't dealers and don't know where Ranger originally used them. About all we can suggest is to contact a Ranger dealer.
Sorry we could not help.
Gene
Answer by: Admin on Jun 9, 2023, 12:44 PM