Ranger Boat Steering Cap Decal 7605504 | Bronze Raised 2 1/4 Inch - All Questions
Ranger Boat Steering Cap Decal 7605504 | Bronze Raised 2 1/4 Inch
SKU
7101016
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Would this work on a 1998 ranger R91 boat wheel
Question by: Jerry biddy on Jun 28, 2023, 5:59 PM
Hello Jerry,
I'm afraid we aren't able to cross reference the steering wheel decals we have to specific boats. You'd need to either contact a dealer and give them that 7605504 part number, or just go by the measurements in the ad.
Sorry we could not help.
Gene
I'm afraid we aren't able to cross reference the steering wheel decals we have to specific boats. You'd need to either contact a dealer and give them that 7605504 part number, or just go by the measurements in the ad.
Sorry we could not help.
Gene
Answer by: Admin on Jun 29, 2023, 8:01 AM