Loading...

Rinker Boat Dash Panel Kit 2070099 | 20 / 22 MTX Mercury (6PC)

Boat part number 1109658 is a new OEM 6-piece dash panel kit for 20 / 22 MTX Rinker Boats, part number 2070099 .
made for Rinker Boats
$879.95 MSRP: $1,189.00
GLS Stock #: 1109658-FD903
Only 4 left
Boat part number 1109658 is a new OEM 6-piece dash panel kit for 20 / 22 MTX Rinker Boats, part number 2070099 .

Kit includes the following:
  • (1) Center Gauge Panel
  • (1) Port Gauge Panel
  • (1) Starboard Gauge Panel
  • (1) Middle Starboard Switch Panel
  • (1) Lower Port Switch Panel
  • (1) Lower Starboard Switch Panel
Center Gauge Panel
This panel is constructed out of faux woodgrain colored plastic with a matte finish.
  • Overall Dimensions: 15 1/4" W x 4 3/4" H
  • Mounts: (8) 1/8" Dia. mounting holes
This panel has (3) pre-installed gauges from Faria. Each gauge has a domed lens, silver bezel, black face, orange needle, white graphics, and blue through-dial lighting.

This panel features the following gauges:
  • Tachometer w/ Digital Screen | P/N: THC623D | Gasoline | 4/6/8 cylinder inboard, 4/6/8/10/12 pole outboard
  • Multifunction Fuel/Volt/Oil/Temperature | P/N: GFC634B
  • Speedometer | P/N: SEK635A | (1) pitot connection
Port Gauge Panel
This panel is constructed out of faux woodgrain colored plastic with a matte finish.
  • Overall Dimensions: 3 1/2" W X 4 1/4" H
  • Mounts: (4) 1/8" Dia. mounting holes
This panel has a pre-installed Mercury trim gauge from Faria, part number GBC652A . This gauge has domed lens, silver bezel, black face, orange needle, white graphics, and blue through-dial lighting. There is (1) 4-pin male Deutsch connection (connector not included).

Starboard Gauge Panel
This panel is constructed out of faux woodgrain colored plastic with a matte finish.
  • Overall Dimensions: 3 1/2" W X 4 1/4" H
  • Mounts: (4) 1/8" Dia. mounting holes
This panel has a pre-installed digital depth finder gauge from Faria, part number DS0176A . This gauge has a silver bezel, black face, digital display, and white graphics. There is (1) 2-pin male connection.

Middle Starboard Switch Panel
This panel is constructed out of faux woodgrain colored plastic with a matte finish.
  • Overall Dimensions: 7 7/8" W x 4 1/4" H
  • Mounts: (4) 1/8" Dia. mounting holes
This panel features the following pre-installed blue illuminated rocker switches and breakers:
  • Navigation/Anchor Lights | ON/OFF/ON
  • Speaker/Courtesy Lights | ON/OFF/ON
  • Docking Lights | ON/OFF
  • Swim Lights | ON/OFF
  • Bilge | ON/OFF
  • Horn | Momentary ON/OFF
  • (5) Push-to-Reset Breakers
Lower Port Switch Panel
This panel is constructed out of faux woodgrain colored plastic with a matte finish.
  • Overall Dimensions: 8 1/4" W x 2 3/4" H
  • Mounts: (4) 1/8" Dia. mounting holes
It features the following:
  • Blower Blue Illuminated Rocker Switch | ON/OFF
  • Ignition Switch w/ (2) Keys | ACC/OFF/ON/START
  • Ignition Push-to-Reset Breaker
  • Blower Push-to-Reset Breaker
Lower Starboard Switch Panel
This panel is constructed out of faux woodgrain colored plastic with a matte finish.
  • Overall Dimensions: 8 1/4" W x 2 3/4" H
  • Mounts: (4) 1/8" Dia. mounting holes
It features the following:
  • Comp Lights Push-to-Reset Breaker
  • 12V Outlets Push-to-Reset Breaker
  • Stereo Push-to-Reset Breaker
  • Stereo Blue Illuminated Rocker Switch | ON/OFF
  • 12V Receptacle
Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.

Kit sold as shown in photos.

Specifications:
  • Boat Manufacturer: Rinker
  • Model: 20 MTX / 22 MTX
  • Part Number: 2070099
  • Material: Plastic
  • Color: Faux Woodgrain
  • Finish: Matte
  • Fuel: Gasoline
  • Set Up For: 4/6/8 cylinder inboard, 4/6/8/10/12 pole outboard
  • Engines: Mercury

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

Pigtail connector / harness not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.

Product Questions

No questions yet. Be the first to ask the question!