Rinker Boat Graphic Decals RIN218815 | R Series 2008 Red (Set of 2) - All Questions
Rinker Boat Graphic Decals RIN218815 | R Series 2008 Red (Set of 2)
SKU
1064497
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
With my boat being a 91 24 foot cuddle Rinker can I make it work?
Question by: Glen on Aug 12, 2021, 10:35 PM
Hello Glen,
I'm afraid we do not know. We aren't Rinker dealers and don't have any way to cross reference them to other boats. That being said, if the 130" x 12" dimensions fit your '91, we know of no reason they wouldn't.
Gene
I'm afraid we do not know. We aren't Rinker dealers and don't have any way to cross reference them to other boats. That being said, if the 130" x 12" dimensions fit your '91, we know of no reason they wouldn't.
Gene
Answer by: Gene Warmuth on Aug 13, 2021, 11:23 AM