Rochester Boat Fuel Lever Sender | 6 Inch Stainless
Boat part number 1072599 is a new 6" 9800 series fuel sending unit from Rochester Gauges Inc, part number unavailable.
made for Custom Applications
$49.95 MSRP: $65.43
GLS Stock #: 1072599-BT892
Only 4 left
Boat part number 1072599 is a new 6" 9800 series fuel sending unit from Rochester Gauges Inc, part number unavailable.
This sending unit is constructed out of stainless steel. The unit measures approximately 6" L x 2 5/8" Dia. overall. Depth water measurement is approximately 5 3/8" L .
There are (5) approximately 1/4" Dia. mounting holes.
Connects with (1) 2 pin female connector.
Accuracy:
System accuracy depends upon proper sender sizing. Resistance values are 30 ohms ±2% at full and 240 ohms ±2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.
Temperature:
This sending unit is constructed out of stainless steel. The unit measures approximately 6" L x 2 5/8" Dia. overall. Depth water measurement is approximately 5 3/8" L .
There are (5) approximately 1/4" Dia. mounting holes.
Connects with (1) 2 pin female connector.
Accuracy:
System accuracy depends upon proper sender sizing. Resistance values are 30 ohms ±2% at full and 240 ohms ±2% at empty. System accuracy may depend upon tank shape. System accuracy may be less near full and empty. System accuracy may be less if tank is not level. System accuracy may be less depending upon indicator. This sender is not to be used for filling.
Temperature:
- -40°F to 176°F, -40°C to 85°C
- 0.5 watts maximum
- Meets requirements of ISO 10088, ABYC H-24, 33 CFR 183.590 and ISO 8846
- Part Manufacturer: Rochester
- Part Number: Unavailable
- Material: Stainles
- Overall Dimensions: 6" L x 2 5/8"
- Mounts: (1) 2 Pin Female Connector
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Will it work on a 2000 18 foot crownline ski boat
Question by: Millard Burke on Oct 3, 2023, 11:25 AM
Hello Willard,
I'm afraid we are not able to cross reference fuel senders to specific boats. You'd need to determine the depth of your tank, and be sure your fuel gauge is the standard 30-240 ohm range.
Sorry we could not help Willard.
Gene
I'm afraid we are not able to cross reference fuel senders to specific boats. You'd need to determine the depth of your tank, and be sure your fuel gauge is the standard 30-240 ohm range.
Sorry we could not help Willard.
Gene
Answer by: Admin on Oct 3, 2023, 11:31 AM
Need one that is four inches long
Question by: Tom Beeks on Jun 25, 2023, 4:34 PM
Hello Tom,
Unfortunately, we don't currently have anything that short, and they aren't something we can source or order. All we can offer at this time is shown online at this link:
link: https://www.greatlakesskipper.com/motors-and-parts/fuel-tanks/fuel-sending-units
Sorry we could not help.
Gene
Unfortunately, we don't currently have anything that short, and they aren't something we can source or order. All we can offer at this time is shown online at this link:
link: https://www.greatlakesskipper.com/motors-and-parts/fuel-tanks/fuel-sending-units
Sorry we could not help.
Gene
Answer by: Admin on Jun 26, 2023, 10:49 AM
Does this fit a 1999 Scout Sportfish 177?
Question by: Todd Crosby on Jun 19, 2023, 6:03 PM
Hello Todd,
I'm afraid we are not able to cross reference the fuel sending units we have to specific boats. You'd need to check the depth of your tank, and check to see if your fuel gauge is the same standard 30-240 ohm range as this sender.
Sorry we could not help more.
Gene
I'm afraid we are not able to cross reference the fuel sending units we have to specific boats. You'd need to check the depth of your tank, and check to see if your fuel gauge is the same standard 30-240 ohm range as this sender.
Sorry we could not help more.
Gene
Answer by: Admin on Jun 20, 2023, 10:54 AM
Will this work in replacing the 2001Larson 190 lxi fuel-level sender
Question by: Barry Kelling on Mar 5, 2023, 9:17 AM
Hello Barry,
I am very sorry, but we are not able to cross reference sending units to specific boats. That being said, if the length works for you, chances are the unit will be compatible with your fuel gauge. This is the industry standard 30-240 ohm range.
Gene
I am very sorry, but we are not able to cross reference sending units to specific boats. That being said, if the length works for you, chances are the unit will be compatible with your fuel gauge. This is the industry standard 30-240 ohm range.
Gene
Answer by: Admin on Mar 6, 2023, 10:54 AM
Do you have a sender with this attachment that's 18inches?
Question by: Brian Struck on Jun 19, 2021, 10:14 PM
Hello Brian,
Closest I found is 18 1/2" from WEMA at this link:
Link: https://www.greatlakesskipper.com/wema-boat-fuel-sending-unit-ssl-18-5-lowe-gas-18-1-2-inch-stainless
Unfortunately they aren't something we can source or order.
Gene
Closest I found is 18 1/2" from WEMA at this link:
Link: https://www.greatlakesskipper.com/wema-boat-fuel-sending-unit-ssl-18-5-lowe-gas-18-1-2-inch-stainless
Unfortunately they aren't something we can source or order.
Gene
Answer by: Gene Warmuth on Jun 20, 2021, 11:40 AM