Sea Ray 1943486 Granite 290 Sundancer 09 Boat Decal Kit - All Questions
Sea Ray 1943486 Granite 290 Sundancer 09 Boat Decal Kit
SKU
1020076
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
Do you have the kit for the front deck mats of the 290 sea ray sundancer 2006, so people dont slip in the front
Question by: rafael ortiz perez on Feb 15, 2022, 9:13 AM
Hello Rafael,
Unfortunately, we do not at this time, and they are not something we can source or order. All we can offer is non skid flooring off the roll that you would need to cut to size.
If you do go that route, we have a very good selection of non skid at great prices at this link:
link: https://www.greatlakesskipper.com/upholstery-tops-flooring/boat-carpet-flooring-materials/flooring?product_list_dir=asc
Sorry we could not help more.
Gene
Unfortunately, we do not at this time, and they are not something we can source or order. All we can offer is non skid flooring off the roll that you would need to cut to size.
If you do go that route, we have a very good selection of non skid at great prices at this link:
link: https://www.greatlakesskipper.com/upholstery-tops-flooring/boat-carpet-flooring-materials/flooring?product_list_dir=asc
Sorry we could not help more.
Gene
Answer by: Admin on Feb 15, 2022, 10:40 AM