SeaArk Boat Gauge Dash Panel | Euro Series 18 3/4 x 9 Inch White

Boat part number 1073485 is a like new gauge dash panel from SeaArk boats, part number unavailable.
made for Custom Applications
$199.95 MSRP: $269.93
GLS Stock #: 1073485-GD655
Only 2 left

SeaArk Boat Gauge Dash Panel | Euro Series 18 3/4 x 9 Inch White

Boat part number 1073485 is a like new gauge dash panel from SeaArk boats, part number unavailable.

This panel is constructed out of marine grade plastic, white in color with a green trim and lettering. Measures approximately 18 3/4" L x 9" H overall. Has (1) 3 1/8" Dia. cutout with (3) 3/8" Dia. mounting holes around the perimeter of the cutout for a steering wheel and (8) 1/4" Dia. mounting holes around the perimeter of the panel. Has (1) 9-Pin male duetsch connector.

This panel hosts (3) pre-installed Euro Series gauges from Faria. These illuminated gauges features a black bezel, flat lens, white lettering, numerals, accents, and needles.

The gauges are as follows:
  • (1) 55 MPH Speedometer Gauge | SE9463J | Has a pitot connection
  • (1) Fuel Gauge | GP937C | Has (3) threaded bolt connections
  • (1) Volt Gauge | VP9134C | Has (3) threaded bolt connections
This panel hosts the following components:
  • (1) "Lighter" 12V Power Socket W/ Push Breaker
  • (1) Illuminated "Accessories" Rocker Switch W/ Push Breaker | On/Off
  • (1) Illuminated "Nav/Anchor Lights" Rocker Switch W/ Push Breaker | On/Off/On
  • (1) Illuminated "Main" Rocker Swtich W/ Push Breaker | On/Off
  • (1) Illuminated "Aerator" Rocker Switch W/ Push Breaker | On/Off
  • (1) Illuminated "Auto/Manual Bilge" Rocker Switch W/ Push Breaker | On/Off/On
  • (1) 3 1/4" Dia. Gauge Cutout Filler
  • (1) 2" Dia. Gauge Cutout Filler
Please Note: May contain minor scuffs and/or scratches due to storage and handling.

Specifications:
  • Boat Manufacturer: SeaArk
  • Part Number: Unavailable
  • Color: White / Green
  • Overall Dimensions: 18 3/4" L x 9" H
  • Connections: (1) 9-Pin Male Deutsch

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual not included.

Hardware not included.

This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.