Stratos Boat Tachometer 7E355 | Beede 960578 Silver Red 3 1/4 Inch
Boat part number 7100523 is a new 7000 RPM tachometer from Stratos, part number 7E355 . Manufactured by Beede, part number 960578 .
made for Stratos Boats
$89.95 MSRP: $121.43
GLS Stock #: 7100523-BV568
Only 7 left
Boat part number 7100523 is a new 7000 RPM tachometer from Stratos, part number 7E355 . Manufactured by Beede, part number 960578 .
This clear illuminated gauge features a domed lens, a silver bezel, red face, black / white lettering / numerals, a white needle, and features the Stratos logo. This measures approximately 3 3/4" diameter across the face and needs an approximate 3 1/4" diameter cutout overall. Connects with (6) threaded bolts.
Mounting bracket included.
Set up for 4/6/8 Cylinder and 10/12 Pole Engines
Specifications:
This clear illuminated gauge features a domed lens, a silver bezel, red face, black / white lettering / numerals, a white needle, and features the Stratos logo. This measures approximately 3 3/4" diameter across the face and needs an approximate 3 1/4" diameter cutout overall. Connects with (6) threaded bolts.
Mounting bracket included.
Set up for 4/6/8 Cylinder and 10/12 Pole Engines
Specifications:
- Boat Manufacturer: Stratos Boats
- Part Number: 7E355
- Part Manufacturer: Beede
- Part Number: 960578
- Colors: Silver / Red
- Overall Dimensions: 3 3/4" diameter across the face
- Cutout: 3 1/4" diameter
- Connections: (6) Threaded Bolts
- Set up for 4/6/8 Cylinder and 10/12 Pole Engines
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Pigtail connector / harness not included.
Wiring diagram NOT included. You will need to check with a dealer for the proper pin/wiring sequencing.
Product Questions
Will this fit stratos xl 17 90 hp Johnson v4. Old tac very intermittent signal?
Question by: RDC on Jun 4, 2020, 4:11 PM
Hi RDC,
Thank you for contacting. This should work out great for you. All the post terminals are labeled, so hook up will be straight forward. The only thing is playing with the pulses dial to ensure you are getting the proper reading. If you have any further questions, feel free to contact back.
-
Jake
Thank you for contacting. This should work out great for you. All the post terminals are labeled, so hook up will be straight forward. The only thing is playing with the pulses dial to ensure you are getting the proper reading. If you have any further questions, feel free to contact back.
-
Jake
Answer by: Jake Doro on Jun 5, 2020, 8:54 AM