Taco Boat Flexible Dock Bumper V11-0948WHA20 | White Vinyl (20 FT)
Boat part number 1053613 is a new 20 foot section of heavy duty white flexible dock bumper from Taco Metals, part number V11-0948WHA20 .
made for Custom Applications
$64.95 MSRP: $87.68
GLS Stock #: 1053613-GF835
56 in stock
Boat part number 1053613 is a new 20 foot section of heavy duty white flexible dock bumper from Taco Metals, part number V11-0948WHA20 .
Protect your vessel at the dock with vinyl Dock Bumper. It installs directly on the dock and will protect against damage from waves, wakes and wind. This Dock Bumper is constructed from soft durometer vinyl in one continuous coil and provides a cushioning effect to absorb impact. When installing, tight radius bending can be done with no heating.
This dock bumper is constructed of white vinyl and measures approximately 3 3/8" H x 1 3/8" D with a 1 1/2" W x 1" D molded center. See photos for detailed measurements.
Sold in 20 foot sections. Simply enter the number of 20 foot pre-cut sections you desire in the quantity field. This is a pre-cut item. Longer lengths unavailable.
Specifications:
Hardware and instruction / installation manual not included.
Protect your vessel at the dock with vinyl Dock Bumper. It installs directly on the dock and will protect against damage from waves, wakes and wind. This Dock Bumper is constructed from soft durometer vinyl in one continuous coil and provides a cushioning effect to absorb impact. When installing, tight radius bending can be done with no heating.
This dock bumper is constructed of white vinyl and measures approximately 3 3/8" H x 1 3/8" D with a 1 1/2" W x 1" D molded center. See photos for detailed measurements.
Sold in 20 foot sections. Simply enter the number of 20 foot pre-cut sections you desire in the quantity field. This is a pre-cut item. Longer lengths unavailable.
Specifications:
- Part manufacturer: Taco Metals
- Part number: V11-0948WHA20
- Color: White
- Material: Vinyl
- Overall Dimensions: 3 3/8" H x 1 3/8" D
- Length: 20 FT
Hardware and instruction / installation manual not included.
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Instruction / installation manual not included.
Hardware not included.
Product Questions
Is it also available in 25’ lengths
Question by: Stewart on Dec 30, 2023, 4:41 PM
Hello Stewart,
I'm afraid we only have in 20 ft lengths at this time, and they are not something we can source or order. All we can suggest is to contact Taco Marine directly.
Sorry we could not help.
Gene
I'm afraid we only have in 20 ft lengths at this time, and they are not something we can source or order. All we can suggest is to contact Taco Marine directly.
Sorry we could not help.
Gene
Answer by: Admin on Jan 2, 2024, 8:57 AM
How much does this item weigh?
Question by: Lisa on Apr 23, 2022, 10:07 PM
Hello Lisa,
A 20 ft long section weighs 22 lbs.
Thank you.
Gene
A 20 ft long section weighs 22 lbs.
Thank you.
Gene
Answer by: Admin on Apr 24, 2022, 11:14 AM
Can I get a 30’ long piece?
Question by: Tom Brady on May 9, 2021, 10:22 AM
Hello Tom,
Unfortunatley these are pre cut 20' sections from Taco, we do have several 20' sections in stock!
Ethan
Unfortunatley these are pre cut 20' sections from Taco, we do have several 20' sections in stock!
Ethan
Answer by: Ethan Doro on May 9, 2021, 10:55 AM
How are these bumpers secured to the dock?
Question by: Donald F Clickner on Feb 28, 2021, 4:52 PM
Hello Donald,
Here is what Taco recommends:
1) Clean the dock surface area so you have a smooth, even surface.
2) Secure the Dock Bumper to the dock by attaching stainless steel screws every 4-6" apart on both sides of the bulb of the Dock Bumper.
3) Use pruning shears to cut Dock Bumper to the desired length.
Hope this helps!
Gene
Here is what Taco recommends:
1) Clean the dock surface area so you have a smooth, even surface.
2) Secure the Dock Bumper to the dock by attaching stainless steel screws every 4-6" apart on both sides of the bulb of the Dock Bumper.
3) Use pruning shears to cut Dock Bumper to the desired length.
Hope this helps!
Gene
Answer by: Gene Warmuth on Mar 1, 2021, 2:27 PM
Does the have self adhesive on the back
Question by: Calvin Barnes on Oct 17, 2020, 10:57 AM
Hi Calvin,
It does not. It is designed to be screwed down via the lips on the top and bottom. You could put a double sided adhesive on the back, but it would have to be some pretty tough stuff to be sure it will hold for an extended period of time. If you have any further questions, feel free to contact back. Thanks!
-
Jake
It does not. It is designed to be screwed down via the lips on the top and bottom. You could put a double sided adhesive on the back, but it would have to be some pretty tough stuff to be sure it will hold for an extended period of time. If you have any further questions, feel free to contact back. Thanks!
-
Jake
Answer by: Jake Doro on Oct 18, 2020, 7:51 AM