JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Mako Boat Windshield 122231 | 216 Clear Glass 80 Inch (3 Piece Set) - All Questions
Mako Boat Windshield 122231 | 216 Clear Glass 80 Inch (3 Piece Set)
SKU
8100004
Hi - We have a 1999 Mako 19.5 Dual and need a new windshield. Do you have any? Also, if it helps, the l & r side glass is ok.
Thanks,
Jon Drezner
jon@drezner.com
609-558-9611
Thanks,
Jon Drezner
jon@drezner.com
609-558-9611
Question by: Jon Drezner on May 10, 2021, 2:09 PM
Hello Jon,
We typically only carry complete windshields with some select center walk throughs. Unfortunately we don't currently have one specific to your Mako and it isn't something we can source/order.
Going back to '99, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/7c4bf11e5b00fdb8413327136c54afc9/b/b/bbe98248d81e362715211a34fb669c7a_1.jpg
The single most important measurement is the 74". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
We typically only carry complete windshields with some select center walk throughs. Unfortunately we don't currently have one specific to your Mako and it isn't something we can source/order.
Going back to '99, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.
Here is a link that shows how we measure them:
https://www.greatlakesskipper.com/media/catalog/product/cache/7c4bf11e5b00fdb8413327136c54afc9/b/b/bbe98248d81e362715211a34fb669c7a_1.jpg
The single most important measurement is the 74". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.
If interested, here is a link to all we currently have:
http://greatlakesskipper.com/boat-parts/windshields-glass-parts
Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.
Hope this helps!
Gene
Answer by: Gene Warmuth on May 10, 2021, 2:55 PM