JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Tracker Boat Accent Decal 185341 | 185340 Metallic Gray Sticker (Set of 2) - All Questions
Tracker Boat Accent Decal 185341 | 185340 Metallic Gray Sticker (Set of 2)
SKU
8105222
How do I install this decal on my boat?
Question by: Ricky Watts on May 18, 2021, 1:35 PM
Hi Ricky,
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
The proper way to install this decal would be to clean the hull with an acid base cleaner to remove any grime and wax residue. From there, let the surface dry completely for 24 hours. Next you will want to wipe the area with a clean microfiber cloth in order to remove any last dust particles. You will want to hold the decal up in place and use a light masking tape to secure it in order to check the potential location. Start peeling the backing paper at one end, and slowly start to apply. When completely installed, use a soft plastic squeegee to get rid of all the air bubbles. When the transfer paper is removed, and you see remaining air bubbles, try working them out with your fingers. If they will not come out, use a sharp razor blade to poke a very small hole in order to release the air. Let the adhesive settle for another 24 hours. You are then good to go! Thanks!
Jake
Answer by: Jake Doro on May 18, 2021, 1:36 PM
I have a 2012 Tracker Targa v 18 and need to replace a few grey stripes on it. Are these for that model? Thank you.
Question by: Chris Bryan on Aug 1, 2023, 1:31 PM
Hello Chris,
I'm afraid we aren't able to cross reference decals and pinstriping to specific boats. You'd need to either contact a dealer and give them that 185341 part number, or just go by the photos and measurements in the ad.
Sorry we could not help.
Gene
I'm afraid we aren't able to cross reference decals and pinstriping to specific boats. You'd need to either contact a dealer and give them that 185341 part number, or just go by the photos and measurements in the ad.
Sorry we could not help.
Gene
Answer by: Admin on Aug 1, 2023, 2:05 PM