Tracker Boat Windshield 111499 | 25 3/8 Inch Green Smoke Plexiglass - All Questions

Hello Donnie,

I'm sorry, but we do not know. We are not dealers and aren't able to cross reference it to specific boats. You'd pretty much need to just go by the measurements in the ad.

Gene

Hello Dan,
This may, we would recommend confirming measurements to be sure. If you have any questions please be sure to contact back.

Thank you!

Ethan

Hi Paul,

I'm sorry, but we do not know. We aren't able to cross reference it to specific boats. You'd pretty much need to measure where you'd be mounting it to see if the dimensions work.

We typically ship either same day or next business day.

Thank you,

Gene

Hi Jim,

Sorry, but this is definitely more green than brown, or bronze as it's often called with marine windshields. Perhaps we'll have something here:

link: https://www.greatlakesskipper.com/search/?q=bronze+windshield

Gene

Hello Phillip,

I'm sorry, but we are not able to cross reference the windshields we have to specific boats. You'd pretty much need to go by the measurements in the ad.

Gene

Hello Dave,

We typically only carry complete windshields, and some select center walk through's. Unfortunately, we don't currently show one specific to your V16 and it isn't something we can source/order.

Going back to '05, we aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds, and you'll find our complete units are more often than not cheaper than having a section custom made.

Here is a link that shows how we measure them:

https://www.greatlakesskipper.com/media/catalog/product/cache/6e08862b351d0448e343d9b56fc3c5ba/a/b/ab56734c7d4cd1a6ff45175ff465b4da_1.jpg

The single most important measurement is the 80". That is center to center of the port/starboard radius. If you can find one that matches yours, there is a good chance it will work. The height, and to an extent the length can usually vary, and the width across the back as well, because the back can flex so much.

If interested, here is a link to all we currently have:

http://greatlakesskipper.com/boat-parts/windshields-glass-parts

Note too: If you find one you feel may work, we can offer a foot print template for $20 (if in the lower 48 states) which is refunded if the windshield is purchased.

Hope this helps!

Gene

Hello Robert,

Unfortunately, we don't currently show one specific to your 1648 and it isn't something we can source/order, or cross reference to what we do have.

We aren't aware of any retailers who might have "on the shelf" anymore. You may need to either find someone to make one, or find one close and use it. That option isn't as daunting as it sounds.

Here is a link that shows how we measure ours:

https://www.greatlakesskipper.com/media/catalog/product/9/2/92d69f1326b48baf26cf4d7ba5ec699b_1.jpg?optimize=low&bg-color=255,255,255&fit=bounds&height=700&width=700&canvas=700:700

That "a" dimension of 14" is the critical one. It is center to center of each sides radius. If you can find something that size, and curve, chances are good it will work for you.

If interested, here is a link to all we currently have:

https://greatlakesskipper.com/boat-parts/windshields

Hope this helps!

Gene

Hello Brian,

I am sorry, but we are not able to cross reference the windshield to specific boats. You'd need to either contact a dealer and give them the 111499 Tracker part number, or just go by the measurements in the ad.

Gene

Hello Neil,

I'm afraid we are not able to cross reference it to specific bots. You'd need to either contact a dealer and give them the 111499 Tracker part number, or just go by the measurements in the ad.

Gene

Hello Ray,

I'm afraid we aren't able to cross reference the windshield to specific boats. You'd need to either contact a dealer and give them that 111499 Tracker part number, or just go by the measurements in the ad.

Sorry we could not help.

Gene